WTB-Royal Collet closer part.

mark costello · Aug 3, 2016

I have a Royal collet closer and I need the adapter that goes on the left end of the spindle. I have a 15" Clausing Colchester 8900 series. The closer locks into a slot to hold the adjustment for collet pressure. Google seems to indicate it is a hub. Don't know if that is right. Let Me know if You have one, thanks, Mark.

kensmachine · Aug 3, 2016

ther 2 parts the adapter machine specific make your own and the ring with the slots which are all same for the 5c lever closers. I have bought some off ebay cheap. You may also be able to buy them from Royal still but they only sell pneumatic closers. ken

kensmachine · Aug 3, 2016

its listed as a 10 EE part but it looks to big for one Ken Monarch Lathe 1 EE 5c Collet Closer Assembly Parts | eBay

morsetaper2 · Aug 4, 2016

mark costello said:
I have a Royal collet closer and I need the adapter that goes on the left end of the spindle. I have a 15" Clausing Colchester 8900 series. The closer locks into a slot to hold the adjustment for collet pressure. Google seems to indicate it is a hub. Don't know if that is right. Let Me know if You have one, thanks, Mark.

Don't know if this helps you, its a 13x40 being parted out w/ collet closer

Clausing Colchester 13" x 40" English Metric Lathe 5c Collet Closer | eBay

mark costello · Aug 4, 2016

I already have the lever and attached parts, just need the hub. I will follow up on these leads, thanks all.

Search

Largest Manufacturing Technology Community on the Web

Search

WTB-Royal Collet closer part.

mark costello

Stainless

kensmachine

Cast Iron

kensmachine

Cast Iron

morsetaper2

Diamond

mark costello

Stainless

Similar threads