Toyoda mill FV-45 Fanuc 11m controller
Close
Login to Your Account
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2010
    Location
    pa usa
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default Toyoda mill FV-45 Fanuc 11m controller

    I am running a Toyoda mill FV-45 with a Fanuc 11m controller. After setting my tools to top of part wich is now part zero, how come I can't see the actual z position from part zero. z position is always reads from home position of the machine. drives me crazy.X and y are correct to part zero. If someone could help me out with a parameter number that would be great. thanks Tony

  2. #2
    Join Date
    Jul 2010
    Location
    pa usa
    Posts
    4
    Post Thanks / Like
    Likes (Given)
    0
    Likes (Received)
    1

    Default 11 m part zero on z

    you have to go to parameter 2202 and change bit 2 ,from a zero to a 1. walla works great Tony

  3. Likes cash liked this post

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •