squigly1965
Plastic
- Joined
- Feb 14, 2010
- Location
- Central Valley, California
Well here's what I'm doing. I'm building a 2x72 Belt grinder. Reason is I'm a beginner knife maker. So building it myself is cheaper.
I'm planning on using a 1.5 hp 3 phase motor and only have 120v available
Well anyway. What i'm wanting to know is this VFD General Purpose Drive, IP20<br>Up to 15hp, Single or 3 Phase<br>AC Tech SCM/SM - wolfautomation.com
a good one. And how much more involve is hooking it up other than power to and from
Thanks for any and all help here. This is my first experience with a VFD
Chris
I'm planning on using a 1.5 hp 3 phase motor and only have 120v available
Well anyway. What i'm wanting to know is this VFD General Purpose Drive, IP20<br>Up to 15hp, Single or 3 Phase<br>AC Tech SCM/SM - wolfautomation.com
a good one. And how much more involve is hooking it up other than power to and from
Thanks for any and all help here. This is my first experience with a VFD
Chris