paintballnsk
Aluminum
- Joined
- Aug 19, 2016
Hello,
So my previous thread about the Webb worked out. I spent a whole day in the car going to check it out and it's in better shape than I thought. It's excellent.
So, I need to get a VFD for my belt grinder anyway, will this VFD work find with the motor on this Webb:
VFD is a 2 HP 230V Single Phase Input-230V Three Phase Output
Teco Westinghouse Model #: L510-202-H1-N
Constant Torque Sensorless Vector Drive
The motor is this:
Also, Can I safely run the VFD on full and just change the mill with the spindle step pulleys? Does running the mill on a medium speed and varying the speed down with the VFD put stress on anything I should worry about or lose too much torque?
Thanks for the help,
Nick
So my previous thread about the Webb worked out. I spent a whole day in the car going to check it out and it's in better shape than I thought. It's excellent.
So, I need to get a VFD for my belt grinder anyway, will this VFD work find with the motor on this Webb:
VFD is a 2 HP 230V Single Phase Input-230V Three Phase Output
Teco Westinghouse Model #: L510-202-H1-N
Constant Torque Sensorless Vector Drive
The motor is this:
Also, Can I safely run the VFD on full and just change the mill with the spindle step pulleys? Does running the mill on a medium speed and varying the speed down with the VFD put stress on anything I should worry about or lose too much torque?
Thanks for the help,
Nick