If I connect the positive and neutral wires of standard 115 volt alternating house current to the below A1 and A2 terminals it would pull in the magnet, right ?
I ask as I have this model on a mill, that seems to have a burned out coil and the house current test was my only practical way to confirm...I'm more used to 24VDC coils where I have a DC test voltage generator......
I suppose somewhere I could buy just a new coil but suspect it would cost more than the whole NOS contactor from eBay, yes ?
Siemens 3TB42 12 A A8 NEMA Size Motor Starter 12 Volt Coil | eBay
I ask as I have this model on a mill, that seems to have a burned out coil and the house current test was my only practical way to confirm...I'm more used to 24VDC coils where I have a DC test voltage generator......
I suppose somewhere I could buy just a new coil but suspect it would cost more than the whole NOS contactor from eBay, yes ?
Siemens 3TB42 12 A A8 NEMA Size Motor Starter 12 Volt Coil | eBay