shooter212
Plastic
- Joined
- Sep 21, 2017
I recently picked up an old Jet 13x40 belt drive lathe, the wiring was all mixed up when purchased. So far I have throw my breaker 3 times and blow a starting capacitor.
The four wire coming from the switch in the front of the lathe are as followes
Red = U
White = V
Black = 5
Green = 6
I am trying to wire the lathe 220v single phase. any help would be greatly appreciated.
View attachment 208465View attachment 208465View attachment 208465View attachment 208465View attachment 208465
The four wire coming from the switch in the front of the lathe are as followes
Red = U
White = V
Black = 5
Green = 6
I am trying to wire the lathe 220v single phase. any help would be greatly appreciated.
View attachment 208465View attachment 208465View attachment 208465View attachment 208465View attachment 208465