What's new
What's new

Wiring diag. for a Doall Blade Welder?

PM me your email address and I'll send a scan of the schematic page C-6-63 in the DBW-15 manual. This incidentally shows no 110V version.

John Oder
 
Thanks John,
Steve messaged me with the model number and neither the DBW-10_34 or the DBW-10_479 manuals from the DoAll site have a schematic. One thing I did find after looking at all of their DBW manuals was that the DBW-10 is more like my DBW-15 with the High/Low annealing switch (rocker switch) located in the upper left corner of the front panel. The only exception is my DBW-15 has a rocker switch next to this switch (above) that powers the grinder; and of course the addition of the grinder. Is your schematic the same (electrically) for all DBW-1X welders? Joe
 








 
Back
Top