neilca
Aluminum
- Joined
- Jul 24, 2007
- Location
- Marietta, GA
My question isn't about phase conversions but i figured this board had the most knowledgable electricians. I converted my Rockwell mill to a single phase motor years ago. I have been running it with the original drum switch turning in one direction (CCW). I would like to wire it to reverse also. According to the instructions on the motor, a GE 3/4 hp capacitor start/capacitor run, two wires have to be switched in order to reverse rotation. These wires are not the power wires but wires attached to the motor. How can I do this with the drum switch?
Thanks,
neilca
Thanks,
neilca