guitarpro1324
Plastic
- Joined
- Jun 9, 2016
Hey everyone I had just recently bought a machine and the spindle switch would only go in one direction so I bought a drum switch hoping for a quick resolution. It's a single phase motor and I bought a 3 phase drum on accident. After a few hours of jotting down possible wiring solutions I've basically decided that I need to go ahead and get the single phase. What is stumping me is the lack of wiring diagrams on this particular lathe. The wires from the motor go into the panel and I can't tell exactly where they go, plus the wires to the original switch are different colors than those of the motor wires. Any advice would be appreciated!
Sent from my SAMSUNG-SM-N910A using Tapatalk
Sent from my SAMSUNG-SM-N910A using Tapatalk