BT Fabrication
Titanium
- Joined
- Nov 3, 2019
- Location
- Ontario Canada
So went to fire up the machine yesterday and got hit with a ton of errors
Alarm 750 SPINDLE SERIAL LINK START FAULT
Alarm 414 on each axis X Y Z axis detect error
Alarm 351 on all xy and z axis seperate alarms for each AXIS COMMUNICATION error.
Alarm 1070 is my chiller which doesn't fire as no signal from a drive as it has power to the contactor but no ground.
and got the power supply PIL light flashing with the -- for the status, hopefully the drive didnt fry something inside.
any tips where to look? no blown fuses drive has power and grounds on the 18C unit. Ugh.....
the thing was working perfectly fine when shut down the night before. hopefully there is a fanuc guru in here.
Alarm 750 SPINDLE SERIAL LINK START FAULT
Alarm 414 on each axis X Y Z axis detect error
Alarm 351 on all xy and z axis seperate alarms for each AXIS COMMUNICATION error.
Alarm 1070 is my chiller which doesn't fire as no signal from a drive as it has power to the contactor but no ground.
and got the power supply PIL light flashing with the -- for the status, hopefully the drive didnt fry something inside.
any tips where to look? no blown fuses drive has power and grounds on the 18C unit. Ugh.....
the thing was working perfectly fine when shut down the night before. hopefully there is a fanuc guru in here.
Last edited: