Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
Botje's latest activity
-
BWhen I’ve had to do similar jobs the tailstock was bored out to clean up and the tailstock barrel went out for a grind, chrome plate...
-
BGoing thru an Okuma LS that I acquired a while back. Although the ways and the overall condition of the machine is quite good - as I...
-
BI am not too great with links - But the name of the thread I started with the tailstock work is : Tailstock quill bore and Moglice I...
-
BHere is how the tool works: Allen bolt bears on the end of the toggle that pivots on the pin and applies pressure on the bushing ...
-
BSo sometime back i posted about a machine that i got back into service. Its a Tobin Arp cylinder head cam bearing line boring machine...
-
BBotje reacted to ValkmanFP4's post in the thread Schaublin 135 cross slide has gone bananas with
Like.
The inability to directly measure internal stress in a workshop is a concern. Without concrete measurements, determining when stress is... -
BBotje reacted to cwilcox's post in the thread Project Schaublin 160 - Rebuild of S/N 193947 with Like.
Last wednesday I drove 1200 km to bring home a 160. This thread is intended to document my progress as I get it going. There are lots of...
-
BWould any of you be interested in the work I did to the tailstock bore of this LS? The bore was worn oversize .003 at the front, and...