Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
claya's latest activity
-
Cclaya replied to the thread FS: Charmilles D10 EDM, Ram Sinker Type Benchtop Machine w. Accupro DRO, Swiss made PRICE: $750.Is a 40hp RPC. It mainly runs a VMC, hence the size. It also runs the sinkers, but I have never run all 3 at the same time. Just the...
-
Cclaya replied to the thread Sodick AQ35l auto-home issue.Appears that the Z-brake is not always getting air from the solenoid valve, on power-up. Or the 24V is not always at the solenoid...
-
Cclaya replied to the thread Sodick AQ35l auto-home issue.Unfortunately, I AM the service tech. Closest Sodick tech is 8 hours from here, and not really sure there are any other sinkers in the...
-
Cclaya replied to the thread FS: Charmilles D10 EDM, Ram Sinker Type Benchtop Machine w. Accupro DRO, Swiss made PRICE: $750.I am running 2 EDM sinkers from a RPC.
-
CThe ATC cable got damaged during shipping. Cable wires pulled straight out of the connector. Sodick & 3R only have a partial pinout...
-
Cclaya replied to the thread Is a tip to another shop's workers appropriate for end of major job?.Pay for sending over a food truck. Let them know in advance.
-
Cclaya replied to the thread getting out a blind hardened dowel pin...suggestions?.I thought of weld/pull also. But now that you have one out, can you ballpark the angle and drill from 180° & drive it out?
-
Cclaya replied to the thread Fanuc Beginner Questions Kitamura Sonic Mill 3X with 15M Control.8000 programs are macros. Sometimes these also control the ATC) 9000 programs are internal custom programs. (Usually M-code, etc.. ) In...
-
Cclaya replied to the thread Sodick EDM programming.AQ35L. It would be useful to see some basic programs. The code that LNassist puts out is very difficult to follow.
-
Cclaya replied to the thread Programming R-head on Sodick Sinker AQ.On the LN-1 they changed it to M8: on, M9: off. Sxx is speed. M7: spindle lock. This only works in MDI. But how do we integrate that...
-
Cclaya replied to the thread what does A mean in G code.Normally, Axxx.x is just the 4th axis angle move. But yours is missing the decimal after the 150, AND on a G42 makes no sense for most...
-
COn a Sodick LN1, How do we program the R-head spindle for a rotary burn? Do we manually add a spindle RPM in the code page before NC...
-
Cclaya replied to the thread Phase converter rated below motor size - how big of a problem is this.Call Phase Perfect. Most RPC's are "uprated". Meaning they can handle much higher startup HP loads than the nameplate. On a CNC lathe...
-
CA buddy of mine has an A. Drives it year round, as long as the snow isn't too deep. And if it breaks, he even fixes it. I don't think...
-
Cclaya replied to the thread Yasnac J300 dripfeeding stop randomly.It should already be formatted. If not, any older PC that has a PCMIA flash drive will format it FAT32 IIRC. All my Windows laptops will...
