What's new

Recent content by claytonbraga

  1. C

    Agie 100 with alarms

    No because in my state in Brazil there is no service, they need to come from SP and unfortunately I don't have money to pay for this :)
  2. C

    Agie 100 with alarms

    Hello Everyone, I have a Agie 100 (1987) with some alarms on screen that I'm lost trying to fix it, the machine is presenting alarms 241 (ventilation system out of action) - according to manual need to check the air pressure measuring device, 343 (-5V supply not ok) and 345( Temperature on...
  3. C

    Remote mode on Agie 200D

    Hello everybody, I have a doubt that I think that is not so easy to answer, looking at the screen options of my machine an Agie 200D I saw an option that is a REMOTE MODE, what is it? is a way to control the machine using the serial port communication? When I try to use this function the...
  4. C

    How does one learn EDM?

    I just will share my experience with wire EDM, one year ago I bought one old Agie 200D (1992) and at that time I didn't even know how to turn the machine on and have no experience in CNC machines, Just have some ideas how these machine works but never use it. I just learn how operate the...
  5. C

    How to load the program on old AGIE 100?

    Hello Agieman, you are the Man, your answer as precisely, I performed the test and was easy to see that the wire is slipping in the brake whell, I cleaned and the alarm disapear but some minutes later started to apear again, I will make a double check to understand better this point tomorrow...
  6. C

    How to load the program on old AGIE 100?

    Hello Agieman, I Finally found a way to transfer the program to the machine (I'm using Cimco software but the main problem was the serial port configuration) But now the machine is presenting error 420 and 511 at same time when the program start to run, I believe that the error 511 (MID not...
  7. C

    How to load the program on old AGIE 100?

    Today i soldered a rs232 cable with pins 2 and 3 inverted but nothing changed. I'm suspecting that the problem is related to the software that I'm using or some machine configuration (I'm trying to transfer using hyperterminal, Fikus visual CAM, and a Brazilian Cam software) 🙁
  8. C

    How to load the program on old AGIE 100?

    I'm using the machine cable, this cable originally goes from the PTR-Emu board to the side of cabinet, I just removed the connector from cabinet side and connected direct to the computer(with windows XP). I believe that there is no pin inverted as this cable use a flat cable. (see the picture...
  9. C

    How to load the program on old AGIE 100?

    Hello Guys, I finally succeed to fix the issue on Monitor (I replace the CRT to a LCD), now I'm having difficulty to transfer the program to machine, I'm triyng to use the Hyperterminal from Windows but the computer didn't send anything to machine. On machine I press OPM 12 enter, and enter...
  10. C

    How to load the program on old AGIE 100?

    Thak you Agieman, As soon I fix the issue with the monitor I will try to send a file with the hiperterminal
  11. C

    How to load the program on old AGIE 100?

    Hello Guys, I need your help in a "simple" question, how I can load a software on old Agie 100? I bought one to be repaired (the monitor is damaged and one water pump is missing). and I'm trying to found a monitor to replace the original but I have this doubt about the process to load a program...
  12. C

    Agie 250 hss no error number or message displayed

    Did you checked the CRT connections between the CRT circuir and SBC board? maybe can be something related to this. I have a Agie 200D that is very similar to this machine (older) and I never had this type of issue.
  13. C

    Buying a "new" machine Agie 100 (1987)

    Hello Agieman, Good to "talk" again with you, (you helped me on another issue with my Agie 200D), for sure I prefer to have a D machine than this one,(do you have one to sell?) I just thinking to buy this machine because the price is very low ($ 2300) and some parts If I'm not wrong are common...
  14. C

    Buying a "new" machine Agie 100 (1987)

    Hello Marcus, Thank you for your point of view, and for sure I will take it in consideration, my main concern is related to the firmware and parameters in case the machine lost it due the 6 months turned off. If is the case is possible to load it again? I believe that probably should load some...
  15. C

    Buying a "new" machine Agie 100 (1987)

    Buying a "new" machine Agie 100 (1987) Hello everybody, I have a Agie 200D that I use to cut steel for stamp press die mold (automotive industries). but now I found another machine to buy in my city (Belo Horizonte, Brazil) that the price is really cheap for the Brazilian market ($ 2400 USD)...
Top