Largest Manufacturing Technology Community on the Web
Stay Connected:
cwhuffman's latest activity
-
CI make my own products and sell them. Imo your approach is completely wrong, if you are on a forum asking for ideas then making your...
-
Ccwhuffman replied to the thread ToolOffset Help.The tool offset measure button can be a bit odd to work with, although I have never had it place an offset for an active tool in an...
-
Ccwhuffman posted the thread Hurco Tm6, Tm8, Tm10 leveling plates in Tooling, Parts and Accessories For Sale or Wanted.I have these two leveling plates for Hurco series lathes, one is used with a little bit of pitting and surface rust in some areas while...
-
-
Ccwhuffman posted the thread Hurco CNC Lathe TM6i Static Bolt on Tool Blocks- Lot of 6, 1.25 ID in Tooling, Parts and Accessories For Sale or Wanted.A few months ago at an auction, I purchased two cabinets full of random tooling and other supplies. This was an all Hurco shop that had...
-
-
Ccwhuffman replied to the thread My last Haas arrived..I have worked with a lot of Haas machines during my short career, all being built between 2014 and 2018 to be specific. I have been...
-
Ccwhuffman replied to the thread QTN250MS Sub Spindle Removal Procedure.I actually found your thread a few weeks ago when doing my initial research for this project. While the components are different, and...
-
Ccwhuffman replied to the thread New Haas door safety.I do not know how they are doing the newest machines off the factory floor, but turning the set-up key always allows me to run the...
-
Ccwhuffman replied to the thread QTN250MS Sub Spindle Removal Procedure.Absolutely, I will be making LOTS of phones and videos.....may have to make a YouTube video on the process as well.
-
Ccwhuffman replied to the thread QTN250MS Sub Spindle Removal Procedure.I had spoken with a technician about the sub spindle ordeal before I purchased the machine. He too warned me about how the spindle is...
-
CThis may be a bit of a long shot, but would anyone out there happen to have a written procedure, process, or general tips and tricks for...
