What's new

Recent content by dll6

  1. D

    Mori MV35/40 spindle oil leak

    Actually I see there's quite a bit out there on ladder editing. Just needed to know what to look for
  2. D

    Mori MV35/40 spindle oil leak

    Vancbiker excellent information, that's not easy information to find and I appreciate that it took you years of working on these machines to accumulate it and are willing to share it ... Thank you again for your time
  3. D

    Mori MV35/40 spindle oil leak

    I've seen those guys posting in their forums too. There the ones I figure I'll get the hand-me-down original Yasnac or Fanuc controls from, for cheap, if I go the upgrade route.
  4. D

    Mori MV35/40 spindle oil leak

    I agree that a good retrofit option is hard to find and even harder to implement. Ive never been accused of being a quick learner, but I am persistent, I rarely give up. Ive not found any retrofit kits I'm happy with. In working with this machine I'm becoming very familiar with its ladder...
  5. D

    Mori MV35/40 spindle oil leak

    .. Turned out there are 2 long set screws that protrude through the drawbar nut into a groove on the drawbar. When I laid the spindle on its side the whole assembly slid out the top, thats when I noticed the set screws.
  6. D

    Mori MV35/40 spindle oil leak

    I bought the machine because I thought it a sturdy design, I always planned to retrofit the control if it turned out to be a good donor, the jury is still out .... This is my first NC machine. Is there a better design?
  7. D

    Mori MV35/40 spindle oil leak

    I should be able to get it close .. I should have measured how much thread was exposed before messing with it. If it's not right at least there's not much to disassemble to get back to the nut. Now I have more cleaning as well as find a couple new orings. I also am going to take some pics...
  8. D

    Mori MV35/40 spindle oil leak

    I got the spindle out and the top oring was indeed cut. In figuring out the disassembly process I inadvertently tried loosening the nut holding the pull stud thinking the nut was part of the disassembly. Any idea if loosening the pull stud screwed up anything ... how about the adjustment...
  9. D

    Mori MV35/40 spindle oil leak

    Thank you That's what I needed to know
  10. D

    Mori MV35/40 spindle oil leak

    Spindle removal I don't suppose anyone's got a parts breakdown of the spindle for some idea on how it comes out? I loosened some hardware in the bottom of the spindle to see if the spindle would drop any but I think there's a spanner nut on top, maybe more, before the spindle will come out
  11. D

    Mori MV35/40 spindle oil leak

    The manual calls for "super multiway 2" I hope that crosses because I bought 5 gallons last year
  12. D

    Mori MV35/40 spindle oil leak

    Any idea if MOBIL VELOCITE 3 Spindle Oil is the right stuff?
  13. D

    Mori MV35/40 spindle oil leak

    You posted while I was typing .. Out the bottom it is
  14. D

    Mori MV35/40 spindle oil leak

    Single speed .. 6k rpm spindle I guess from the bottom I'll lose all the spindle oil .. I'll try pulling the hydraulic tool clamp cylinder out the top first
  15. D

    Mori MV35/40 spindle oil leak

    Does it or will it disassemble from the bottom?
Top