Largest Manufacturing Technology Community on the Web
Stay Connected:
DrimJohn's latest activity
-
DDrimJohn replied to the thread DMG DMU50evo spindle oil-air lubrication settings.Hello, thank you for the help, there is 3 tubes from the block and one with just air. I can see 3 tubes end up in the bottom of the...
-
-
DDrimJohn replied to the thread Replacement for CL46 oil for MAHO MH600C.I had the same problem for my machine, it states CLP46 or CL46 but when i googled the recommended oils i found out that they were...
-
DDrimJohn posted the thread DMG DMU50evo spindle oil-air lubrication settings in DMG MORI, Gildemeister, Maho CNC.Hello, i need advice. What is the right pressure of air in the air-oil lubrication for the spindle and the extra air for the sealing of...
-
-
DDrimJohn replied to the thread Swapping Heidenhain DDC2 drive controllers to test - Simodrive 611.the Philips 4022 229 3011 (in out module in the controller) has a similar pot, i thing this is the way to tell the machine what cart is...
-
-
DDrimJohn replied to the thread Swapping Heidenhain DDC2 drive controllers to test - Simodrive 611.When i had made a swap in the DDC2 drivers the axis were wrong, i am not sure but i thing it has something to do with the blue pot...
-
-
DDrimJohn replied to the thread Philips, Grundig, Millplus Information Collaboration.Ihave send you email with my hard drive image it is V4.00 MillPlus from my DMU50evo
-
DDrimJohn replied to the thread DMG DMU 50 Evolution machine constants.
-
-
DDrimJohn replied to the thread DMG DMU 50 Evolution machine constants.This is how the have made the pipes in the newer versions
-
-
DDrimJohn replied to the thread DMG DMU 50 Evolution machine constants.In mine the oil radiator was leaking from the pressure. change the piping so the oil goes first to the exchanger and then to the pump so...
-
-
DDrimJohn replied to the thread DMG DMU 50 Evolution machine constants.Hi, sorry for the late reply, the fan must blow air up thru the radiators. they turn counterclockwise when you look them from below.
