Largest Manufacturing Technology Community on the Web
Stay Connected:
GENERALDISARRAY's latest activity
-
GGENERALDISARRAY replied to the thread Fanuc 21i-MB hang problem.If you contact Fanuc, they can help you diagnose it. I have an 18iMB here that was doing strange things on Mondays before finally...
-
GGENERALDISARRAY replied to the thread Japanese Machines made in Japan?.Giggity
-
GGENERALDISARRAY replied to the thread Good Swiss Tooling.if we gotta have a necro, lets get back on topic Has anyone tried the new Iscar swiss with the switchable heads? Kinda like the Sandvik QS.
-
GGENERALDISARRAY replied to the thread Specialized Vertical mill for EDM Carbons ? Makino SNC 64.Sorry I usually dont click links, especially to MyFace™ so I cant see what was shown. They are great machines for electrodes and...
-
GGENERALDISARRAY replied to the thread Specialized Vertical mill for EDM Carbons ? Makino SNC 64.what are you saying? You are looking at buying one? Makino used the SNC64 model name for a long time for machines that were quite...
-
GGENERALDISARRAY replied to the thread Fanuc 16M in HMC, Y axis red cap encoder issue..I am not real experienced on the non i 16/18 controls, but I believe the encoder is serial on that machine. The only way to see the...
-
GGENERALDISARRAY replied to the thread Fanuc 16M in HMC, Y axis red cap encoder issue..what was the alarm? and is it a non " i " 16?
-
GGENERALDISARRAY reacted to ManualEd's post in the thread Slit spacer - 6061 al - sub spindle / y axis lathe? with
Like.
Could make a custom collet/soft jaws that has a mandrel bolted to the collet chuck/3 jaw chuck. Part slides over the mandrel then gets... -
GGENERALDISARRAY reacted to atex57's post in the thread 1983 Hitachi Seiki HT20 lath with Fanuc 3TF - program stops at first axis move with Like.
My 3T does not use M06, simply Txxxx. Ed.
-
GGENERALDISARRAY reacted to TKassoc's post in the thread Turn- Mill Controller / Machine recommendation with Like.
Esprit is the cleanest mill-turn CAM I've seen. I say that as someone who uses Mastercam daily on 100% prototyping work with 408 and...
-
GGENERALDISARRAY replied to the thread Setting up Network Drive Function - Mori Sieiki NL3000.I think you have to run "mori server" software on a pc on the network. Like Seymour says
-
GGENERALDISARRAY reacted to [email protected]'s post in the thread Baffled By Z offset changing between tool changes with Like.
You are changing to T8, but calling G43 H6. Is that on purpose?
-
GDad had a set, but he made them himself.
-
GGENERALDISARRAY replied to the thread Build A 5-axis CNC Machine - Build Log.is it for teeth?
-
GGENERALDISARRAY replied to the thread WTF???? Suddenly cutting undersized..run a repeatability test for turret index positions.