Largest Manufacturing Technology Community on the Web
Stay Connected:
henrya's latest activity
-
henrya replied to the thread Availability of 15 mm & 20 mm aluminum plate in US..It is possible that these people are not your customers. You’ll have to start with something other than 15 and 20mm plate to make the... -
henrya replied to the thread What is the ideal setup for milling a long fluted rod?.Yes, a search for rifle barrel fluting will show lots of good answers.
-
Used the T3 Melamine media to clean up some hardware on the Harig Super 612 I'm trying to nurse back to life, and really pleased with...
-
henrya replied to the thread Cutting 6" diameter hole in 3/4" rubber mat.I’d use a regular hole saw and have someone keep a stream of water on the cut. Lay the mat over some wood to keep the mat flat and...
-
henrya reacted to wood2steel's post in the thread Powermatic MVN spindle rebuild - or not? with
Like.
Well, actually its a Burke, and must be why Powermatic put their name on it! That Millrite is probably one of the finest undersized... -
henrya replied to the thread OT: CRC brake cleaner - safe on rubber bellows / rubber accordian, plastic , acrylic?.Just dabbing on mineral spirits and letting it sit for days will soften old dried up grease and oil. Dab a little more on every day...
-
henrya replied to the thread Powermatic MVN spindle rebuild - or not?.I think I would clean it out and re-grease lightly with the white lithium that is called for.
-
henrya replied to the thread soda vs walnut shell blasting?.akjeff, What is the media life like doing work like you show? Does it last a while?
-
Just used the T3 this morning to clean up the crusty bottom of a Walker chuck that came on a Harig grinder project that was recently...
-
Hi Stephan, I have/use both the T2 and T3. The T2 is pretty much harmless to both aluminum and steel. The T3 is noticeably more...
-
henrya replied to the thread Vibratory bowl finishing - ebonite and acrylics/resins.You may be in for multiple polishings. Something like first run with walnut and a slightly coarser compound than what you using now...
-
henrya reacted to NewtonPens's post in the thread Vibratory bowl finishing - ebonite and acrylics/resins with Like.
That makes sense. I'll run things in batches then. Even if it takes longer it's worth it to not wear my shoulder out any more than it...
-
henrya replied to the thread Vibratory bowl finishing - ebonite and acrylics/resins.You want your parts to be suspended in and moving with the media. More parts probably needs more media but its set by the size of the...
-
henrya replied to the thread Vibratory bowl finishing - ebonite and acrylics/resins.Regarding walnut shelIs, I would run it dry except for the little bit of polishing compound you add to the bowl. The other thing is to...
-
This is some dumpster fire engineering. The designer really did not even consider the vehicle wheelbase and just arbitrarily picked 20...