Largest Manufacturing Technology Community on the Web
Stay Connected:
MachineAmateur's latest activity
-
MMachineAmateur replied to the thread Advice needed on buying a new or used Tormach CNC Mill.I think the rush is your worst enemy here, if there is a way to alleviate it somehow. Like if the part you were talking about is not...
-
MMachineAmateur replied to the thread Where to find Imperial taps with metric shanks at a reasonable price?.Well i bought a nice set of square key collets, M4 - M14 and that was the day i learned something new about taps and that is the...
-
MMachineAmateur replied to the thread Best trick to adjust lathe serrated jaws quickly?.All i have is a 4 position tool changer..:) With shims and all. Especially if boring is needed, the natural directionality is different...
-
MMachineAmateur replied to the thread Best trick to adjust lathe serrated jaws quickly?.Thanks for the answers, many ways to skin the cat it seems! Using the lathe tool with MDI as an indicator is intriguing, have to try...
-
MMachineAmateur posted the thread Best trick to adjust lathe serrated jaws quickly? in CNC Machining.Hi, I have been wondering how the professionals handle adjusting the CNC jaws which have serrated back edges for locking. There is no...
-
MMachineAmateur replied to the thread New machine day - Brother S700X2 (UK install).You could easily route airblast or mist into 2 of these nozzles and only use 3 nozzles for cooling as 5 is overkill. I kept the left...
-
-
MMachineAmateur replied to the thread New machine day - Brother S700X2 (UK install).If you get bored on adjusting those spray heads for different elevations, i made a fixed block with 5 nozzles on the backside of the...
-
-
MMachineAmateur replied to the thread Used Robodrill vs Brother.When buying older models, the 3D paths might be slightly limited. For example i have TC-S2B-O and it supports only 3 axis simultaneous...
