Largest Manufacturing Technology Community on the Web
Stay Connected:
mmurray70's latest activity
-
Mmmurray70 replied to the thread Power requirements for small machine shop.Id get a separate 200a service. Can probably get by with much less if you have to. But a dedicated 200a service is really easy to do and...
-
Mmmurray70 replied to the thread PHASE PERFECT for a Fanuc Robodrill or Brother Speedio -- What Capacity?.They claim there is no significant voltage drop up to 400% of full load current rating. See attached chart taken from the manual. Looks...
-
-
Mmmurray70 replied to the thread Phase converter balancing with regenerative loads?.Thanks for all the comments guys. I have been using an old mazak lathe (regenerative drive) on this rotary phase converter for several...
-
Mmmurray70 replied to the thread PHASE PERFECT for a Fanuc Robodrill or Brother Speedio -- What Capacity?.Been looking at the PTE 015 myself. Anybody on here have one of these? It should more then handle the brother no problem. Peak current...
-
Mmmurray70 replied to the thread Phase converter balancing with regenerative loads?.Yes I mean with a RPC with balancing caps. Looking at possibly adding an additional idler for more capacity to my system and have been...
-
Mmmurray70 posted the thread Phase converter balancing with regenerative loads? in Transformers, Phase Converters and VFD.I see that a lot of phase converters are balanced to give slightly higher voltage to the manufactured led when unloaded, to allow for...
-
MI would try a lathe threading bar. I've had to do this from time to time for deep threads.
-
Mmmurray70 replied to the thread Fadal VMC15 restrofit few questions.Strange for a "good" machine to have no control box. Both control boxes are missing? Going to be a ton of work to get that going. I...
-
Mmmurray70 replied to the thread A286 AMS 5273 2-56 thread milling help.We did a bunch of M2 threadmilled holes in titanium. Used these tools...
-
Mmmurray70 replied to the thread Learning Mastercam Mill Level 3 How do YOU prefer to set up your parts in the workspace?.Thanks for the explanation. Ahh I see that would be another big advantage too. Not messing up other operations that are programmed off...
-
Mmmurray70 replied to the thread Learning Mastercam Mill Level 3 How do YOU prefer to set up your parts in the workspace?.Can you explain this a little more? If you want to move things around after wouldn't it be better to be using old school way? In the...
-
Mmmurray70 replied to the thread Learning Mastercam Mill Level 3 How do YOU prefer to set up your parts in the workspace?.Haven't had too many crashes here with 2024 so far
-
Mmmurray70 replied to the thread Learning Mastercam Mill Level 3 How do YOU prefer to set up your parts in the workspace?.Thats another big bonus for mastercam. Maybe there are other cam programs that do some things better... But no matter what i try and do...
-
Mmmurray70 replied to the thread Tips/Tools for machining large diameter threads on mill.Iscar and Tungaloy have nice Insert threadmills with a single tooth profile. Great for a wide range of threads, jobshop kinda work. We...
