Largest Manufacturing Technology Community on the Web
Stay Connected:
Mr_CNC_guy's latest activity
-
MMr_CNC_guy replied to the thread 10ee tachometer repair.A bit of a tangent: I looked through the 1931 catalog. Fascinating reading. I noticed a device called a "vacuum tank" and I could...
-
MMr_CNC_guy replied to the thread 10EE Taper Clamp casting possibility - Martin Model.I would go for a taper attachment clamp if he does one.
-
MMr_CNC_guy replied to the thread Brown & Sharp Toolmaker’s Universal Vice..It was a joke, sorry for the misunderstanding.
-
MMr_CNC_guy replied to the thread Brown & Sharp Toolmaker’s Universal Vice..No, no, no, it is not that old! I think that my link is closer to the correct age. My link is from the 1940's, so my vice is 30 years...
-
MMr_CNC_guy replied to the thread Full tear down and Rebuild of a 10EE Round Dial.I have been pondering the Steelman design and I think I understand what it is trying to accomplish. In essence, you are trading off...
-
MMr_CNC_guy posted the thread Brown & Sharp Toolmaker’s Universal Vice. in Tooling, Parts and Accessories For Sale or Wanted.This is a heavy universal vice made by Brown and Sharp. It has 6” jaws and opens to 3 ½”. It is very heavy, weighs 125 Lbs. It is shown...
-
MMr_CNC_guy replied to the thread Model K starts, runs for 3 seconds, then motor stops - updated!.To my ear, your motor never came up to full speed. It should have no trouble reaching full speed in 3 seconds unless the motor has a...
-
MMr_CNC_guy replied to the thread Full tear down and Rebuild of a 10EE Round Dial.I am having some trouble understanding your measurements. In the first chart, it seems that the red trace is way out of its proper...
-
MMr_CNC_guy replied to the thread Full tear down and Rebuild of a 10EE Round Dial.The thing about static and rotary phase converters (basically the same thing) is that they are trying to generate the 3rd phase by using...
-
MMr_CNC_guy replied to the thread Collet, free for postage..Steve Marquess says that it will fit his Black Diamond, so that is likely the standard. It is in the mail to him, so we should soon know...
-
MMr_CNC_guy replied to the thread Collet, free for postage..I don't think that it is a 3C, the diameter is wrong: this is 0.5" and 3C is 0.65". A Black Diamond drill grinder collet is a good bet...
-
MMr_CNC_guy replied to the thread Collet, free for postage..You got it! Please tell me, what kind of collet it it? Is it some standard size?
-
MMr_CNC_guy posted the thread Collet, free for postage. in Tooling, Parts and Accessories For Sale or Wanted.I have this odd collet that I don't know what it goes to. It is a 3/8" collet with a .5" diameter and about 2" long and 24 TPI thread...
-
-
MMr_CNC_guy replied to the thread Full tear down and Rebuild of a 10EE Round Dial.I studied your drawing some more, and you have some mistakes. The drawing to the right is correct, although the two star points can...
