Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Largest Manufacturing Technology Community on the Web
Stay Connected:
SBLatheman's latest activity
-
SBLatheman replied to the thread Ways to Id hardened ways on South bend.The unit code number stamped between the rear ways would end in HG. The bed is not hard under the headstock. The hardness starts in... -
SBLatheman replied to the thread Asking why South Bend Nordick lathes.Do a search for the correct spelling(Nordic), and you will find some discussions. What do you want to know ??
-
Sounds like a perfect solution! smt
-
SBLatheman replied to the thread SB 13 carriage handwheel.I have one. N.O.S. Send me an email. Ted [email protected]
-
So here's a way to wire it- modify the jumpers on the switch to be 'L' shaped (blue wires), and bring the line from the wall into the...
-
SBLatheman replied to the thread model 384B South Bend.I have the parts in the picture. N.O.S. The worm gear needs to be finished (clutch area). Hand drawn print included. Send me an email...
-
-
SBLatheman replied to the thread Information on a SBL toolpost grinder.South Bend make an OD grinder and an ID grinder for the tool post(2 different grinders) That is an ID grinder.
-
SBLatheman replied to the thread What is the in Internal Spindle Taper on a Whacheon WL-435 17"x40" Lathe with A1-6 Spindle?.Ye Yes, MT4
-
SBLatheman replied to the thread What is the in Internal Spindle Taper on a Whacheon WL-435 17"x40" Lathe with A1-6 Spindle?.I have the sleeve in the picture: I think it is the correct one …?
-
-
SBLatheman replied to the thread SB 16 Apron Parts Interchange.http://www.wswells.com/data/parts/992C.pdf look at the parts and part numbers for the 13” and 16”
-
SBLatheman replied to the thread SB 16 Apron Parts Interchange.VERY FEW parts for a 13” apron are interchangeable with a 16”. What parts do you need ??
