What's new

SND's latest activity

  • S
    SND replied to the thread Another Slow down Thread.
    Funny how they always need more tax money but never look at cutting their out of control spending and blatant waste and corruption.
  • S
    SND replied to the thread 2.375in hole in 17-4.
    Sandvik 880 would punch that in about 60-70 seconds, DS20's are good too but start at 4xD which may be a bit long for your use. Only...
  • S
    SND replied to the thread Cant Break A Chip Help!!.
    Sometimes you're gonna get a birds nest and that's all there is to it, unless your "finish pass" can be pretty rough and even then, good...
  • S
    When it comes to the size/type of work I've focused on for the last 20+ years, I'll put my parts against anyone's. But yes I've know a...
  • S
    I find my Lynx 2100LB moves about .0015" from start up to operating temp. I run at 25% rapids most of the time. Shop is always at 68°F...
  • S
    SND replied to the thread Phase Perfect run Haas ST20.
    My Lynx2100LB is on a 20hp PT-355 Phase perfect. It has no problem running it, only once in a while the 7.5hp screw comp will drop the...
  • S
    I wouldn't go near that with a ten foot pole, etc. One friend ran the machine shop at Tesla until a suit came in with a "snot-nosed...
  • S
    SND replied to the thread Another Slow down Thread.
    A flat tax that is fair and equal for everyone and doesn't punish those of us who work harder than the rest would be wonderful. I want...
  • S
    SND reacted to cnctoolcat's post in the thread Another Slow down Thread with Like Like.
    Maybe me putting it in a hillbilly way was too simplistic? But as the subsequent well-done post by "adamm" shows, the Federal Reserve...
  • S
    SND reacted to john.k's post in the thread Another Slow down Thread with Like Like.
    Politicians are the window dressing of democracy......they are allowed to play their silly games while its the 'swamp' that exercise the...
  • S
    SND reacted to rjwalker1973's post in the thread Another Slow down Thread with Like Like.
    unfortunately too many blind eyes won't open...I'm done with you. you already know it all so it is a waste of time.
  • S
    SND reacted to rjwalker1973's post in the thread Another Slow down Thread with Like Like.
    ok dude whatever lmao
  • S
    Other option is if you can drill a hole in the middle then go full depth right away with the endmill and open it to size/shape. Way...
  • S
    I like the Garr VRX in stainless and looks like they make them in 1/16" and either 1/8" or 1/4" flute length, .010" corner rad also...
  • S
    SND replied to the thread Welding 4140.
    I've tig welded a bit of 4140, O1 and HSS tool bits for custom cutting tools. I normally use 308 stainless filler, they say 309 is a...
Back
Top