Largest Manufacturing Technology Community on the Web
Stay Connected:
snowshooze's latest activity
-
Ssnowshooze replied to the thread What's the best way to use H#'s beyond 21?.I fail to understand. #49 is my probe.
-
Ssnowshooze replied to the thread Bobcad 4th axis post for fadal.Al, I have V32 with 4th axis. It seems it is only rotary, not a true 4th. As in, I can only run 3 at a time. Is that right...
-
Ssnowshooze reacted to TheOldCar's post in the thread (IDIOT ALERT) Fadal voltage too high fried 30 ohm resistor? with
Like.
Finally got a better RPC dedicated for the little Fadal. American Rotary AD20 and I was very impressed with the quality. Way smoother... -
Ssnowshooze replied to the thread Best machine for someone who really wants learn and become a machinist.Ok, try Clausing. I actually do not own Makino.
-
Ssnowshooze replied to the thread Oil in coolant.You must have a seal failure someplace. And then, I use Phillips Hydroclear. Very clean stuff. I have a theory that when I machine...
-
Ssnowshooze replied to the thread Best machine for someone who really wants learn and become a machinist.That is the way I learned. But, I never hated it. Bought the machine, said " Self, we gonna learn or die " I was ok with that...
-
Ssnowshooze replied to the thread Best machine for someone who really wants learn and become a machinist.Don't buy anything new. Go with good iron, Haas Fadal, Makino... so many others. Industrial stuff. I picked up a Fadal off base...
-
Ssnowshooze replied to the thread How hard is CNC Machining?.The first part is a killer. After that... it get's easier. Do it. Start with the basics, I have the advantage of being an old...
-
Ssnowshooze replied to the thread Tune rigid tap?.Awesome! That is too easy. I can do this in minutes! It's been a thorn in my side for a long time. Thank you very much!!!! Mark
-
STry This
-
Ssnowshooze replied to the thread Fadal tapping speed .1 or .2 ?.I liked format 1 for simplicity of programming. However, in Format 1 I was unable to take advantage of my memory expansion. I no...
-
Ssnowshooze replied to the thread Fadal tapping speed .1 or .2 ?..1 is low range, for threads big. I do 1 1/4" tapping in .1 .2 is for small threads, and is more responsive. Faster.
-
Ssnowshooze replied to the thread Fadal 2016L coming: Any warnings/advise appreciated!.I ain't sure of a 16... But the 15 was a big machine chopped down. So incredibly over-built... wonderful.
-
SHi Guys! 2007 4020 Ok, on-board program for rigid tapping exists. I purchased the fancy piece of all-thread... I have no idea the...
-
Ssnowshooze replied to the thread Welcome to the new Fadal forum !.This is AWESOME! Thanks so much for resurrecting a Fadal thread!!!