Largest Manufacturing Technology Community on the Web
Stay Connected:
TFPace's latest activity
-
As I mentioned, if the dimension was in there and one was just not seeing it, they look a fool to a customer. I have seen similar... -
TFPace reacted to jamscal's post in the thread Why would anyone want a forklift with no free lift ? (video) with
Like.
Something is wrong with it...one of the masts is sticking to it's neighbor on the way up. It happened to my Nissan. It worked itself... -
TFPace replied to the thread Drawing help.No kidding. I have been apart of this forum since '03 and I read that members are bailing thanks to crap like the comments I have received.
-
Where's all the friction coming from? The guy asked an honest question and it would seem the customer doesn't have the answer. IF it was...
-
TFPace replied to the thread Drawing help.This is is literally all my customer provided me. They are supposed to bring a sample that we can digitize from.
-
TFPace replied to the thread Entry-level plasma cutters for up to 1/2" thick mild & stainless flat & tube?.Anything Hypertherm
-
Looks like a dashboard for a "Personal Watercraft"
-
TFPace replied to the thread Drawing help.Awesome work sir !!!!
-
-
TFPace replied to the thread Drawing help.Bravo SIR !!!!! Off the chart superb.
-
Shown are the non-defined points (just the two at the bottom that includes my guesses. Do not use). There is enough for the 13.000r, in...
-
Less than 10% of my work is supplied with a 3D model. And then to boot, virtually 100% of the 3D models are created to the extreme...
-
Every work order should come with a fully dimensioned and toleranced print and a 3D model made at the midpoint of the tolerance zone...
-
TFPace replied to the thread Drawing help.They sent me the attached photo. That's it. They are going to bring the part over too.
-
TFPace replied to the thread Drawing help.Hello Jim. This is a poorly defined drawing. Thanks for the reply.