What's new
What's new
By:
Advanced search…

Search results

  1. B

    Devlieg Flash Change Chuck

    Flash Change may be a misnomer. Certainly isn't faster than pushing the button on a Devlieg Jigmill for the power drawbar, and changing tools in a few seconds. Getting the flash change adapter oriented correctly, the 1/2 inch hex key in and breaking loose the toolholder takes WAY more time than...
  2. B

    Devlieg Flash Change Chuck

    I'm pretty sure I have SEVERAL. You're wanting a fifty taper NMTB male end, to a 40 taper flash change? I've been using one on a Cincinnati 50 taper vertical mill, to quickly change toolholders so I don't have to climb up to grab the drawbar. Haven't used any other tooling in this mill for...
  3. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    Hey I got out my service parts manual which is around 200 pages. Doing a repair of this magnitude without a manual, and almost zero information is pretty risky. So I waded through the manual and found the relevant pages that show the clutches. The shaft is supposed to come out the FRONT of the...
  4. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    Sorry-missed another day of checking PM. I'll dig out my manuals and see if I can determine what is holding the shaft. I don't remember whether I replaced ALL of the clutches or one, I'd bet i did all of them. One of my gears was trashed also, so I had to pretty much dismantle everything. Have...
  5. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    Obviously you have seen the screen filter in your mill that feeds the hydraulic system- How bad did it look??
  6. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    Amazing how many days goes by so quickly without checking into Practical Machinist. I hate to plead ignorance, but it's been15 to twenty years since I replaced the clutches. Now I DO have the manuals and parts books for this mill. Are you attempting the repair with ZERO documentation? I can...
  7. B

    Moore Universal Measuring Machine - Gage Head Spindle Adapter

    Well excuse me if i offended you by mentioning the incredible changes that have taken place, in the last fifty years, where a myriad of circuits now can somehow work, through a rotating interface. You asked for someone with a Moore #3 for advise, and i looked at my machine. I also had a much...
  8. B

    Are new production Jacobs Super Ball Bearing chucks still good?

    After purchasing the first 14N Ball Bearing Chucks made in China- after Danaher, the jerks that owned Jacobs shut down US manufacturing, it was immediately obvious their quality disappeared. Three 14 N Chucks, the chuck keys were NOT interchangeable. So I went to LFA, and have used them for at...
  9. B

    Moore Universal Measuring Machine - Gage Head Spindle Adapter

    I went out and looked at my Moore #3 measuring machine to refresh my memory what I have. Mine is pretty old and has a Cleveland indicator, but still a very similar looking attachment. You need something that can rotate, feed your signal to the indicator and not wad up the wiring, so the part...
  10. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    Your lubrication system uses Bijur metering parts- readily available. I think Bijur sells direct at list price. Look at them carefully and each one has a part number stamped on it. They are not ALL the same as different locations require more or less oil. Bijur's web site use to be good and has...
  11. B

    G&L Handbook: Horizontal Boring, Drilling and Milling Machines and Their Application

    The Kearney and Trecker salesmans book, is not something anyone wants to copy. The Giddings and Lewis book seems to have some fans. I just used the sales catalog as an example of why I no longer want to just let people "borrow" my books.
  12. B

    Cincinnati Milacron 207MK horizontal mill powerfeed issue

    You have a hydraulically operated milling machine. When I was using a 207MK a lot many years ago, I posted quite a bit of information on them- do a search. The feeds and rapids are operated by clutches, which rely on hydraulic pressure to work. There is an INLET filter to the hydraulic system...
  13. B

    jones shipman 1300 grinder manual / lubrication

    No the spindle doesn't use the same oil as the bed. There's typically THREE oils on the grinder. The spindle takes light weight spindle oil. The way lube pump, uses way lube. and the Hydraulics in the base, which also oils the table uses a hydraulic oil. I can give specific brands that I use...
  14. B

    G&L Handbook: Horizontal Boring, Drilling and Milling Machines and Their Application

    I HAVE this book, and it is really fantastic. BUT it's been sitting on my bookshelf for about fifteen years. I DON'T want to sell it, but I would loan it out. In 2002 I was high bidder on a Kearney and Trecker salesmans catalog- a binder with an advertising brochure of every Kearney and Trecker...
  15. B

    Broach Bushings?

    An aluminum broach bushing would be fine, but WHY invent the wheel when you can buy one ready made cheaper than you can machine one for. Broaching DOES have some pitfalls. I've broached thousands of parts at this point, and now try to do everything with production broaches. BUT when broaching...
  16. B

    Replacement hand wheel grip?

    "we cast aluminum replacement handles and hand wheels routinely for these Lodge and Shipley's " I can see castings for the hand wheels, but the handles? To machine a handle in a CNC lathe takes less than two minutes from solid material. Any radius of curve. Scary fast. I had patterns for four...
  17. B

    Replacement hand wheel grip?

    Your handle is certainly SMALL for a cast iron handwheel. The handles on my Bridgeport are ALL longer and bigger than the 2 3/4 long with 5/16ths shank size. The handles I make twenty or thirty at a time are 5/16ths mounts- two and a half inches long. Maybe your cast iron handwheel in the...
  18. B

    Replacement hand wheel grip?

    I'm looking at the handle in your picture- it looks like you have the NON- rotating handles. Is that correct? If I was smart enough to get a picture posted, you'd be amazed at my box of fully polished handles that are already made. Your 5/16ths dimension is the size I use for my small ball crank...
  19. B

    Replacement hand wheel grip?

    Well you can't find a handle like yours because the company that made them- Balcrank, went out of business. The Chinese did a great job making five dollar handles in the early 2000's, that were ugly but cheap. I continued to buy Balcranks at about fifty bucks apiece, until they quit making them...
  20. B

    Devlieg 2B 36

    I just read your other post on getting this Devlieg. I THOUGHT it looked like it had an extended column. That's really nice to have three feet. Your machine looks pretty nice. As a word of caution, my 2b-36 was a great machine to use, but I was really having problems with the electrical...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top