Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
M
Heidenhain iTNC 530
I believe I might have a spare, I'll take a look and possibly swap it beginning of next week. Worth a shot if I do. Thanks for the pointer- MaintManAndy
- Post #8
- Forum: CNC Machining
-
M
Heidenhain iTNC 530
I don't think I have explained in enough detail what is happening, my bad folks. I switch off the machines over the weekends to save energy. Monday comes around, when I switch the machine on at the isolator, the machine does not start to power up. The screen does not come on, the hydraulics...- MaintManAndy
- Post #6
- Forum: CNC Machining
-
M
Heidenhain iTNC 530
I don't seem to be receiving any errors on the control at all, but I am just going into the electrical panel and heating up the main control where all the plc input and outputs are e.g. X1, X2, X57 etc. Just gently blowing heat into the bottom and on the side. It works for now and the machine...- MaintManAndy
- Post #3
- Forum: CNC Machining
-
M
Heidenhain iTNC 530
Good day to all, We have a Correa FP30/30 with a very early version of the Heidenhain iTNC 530 control, it almost looks like a iTNC 426 on the display. This was retrofitted with this control back in 2013 and has been running well since. I have recently encountered a problem with the PLC...- MaintManAndy
- Thread
- Replies: 8
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
Bill, Thankyou very much for your help, this has been going on for weeks and nobody had a clue. It was missing the G00 at the beginning of the program. It wouldn't move after that for that reason. I've placed the G00 before the 1st tool call as suggested and will now run the program like a...- MaintManAndy
- Post #22
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
I agree, but comparing this to program O1000, which runs perfectly, it is not much different. O1000 goes as follows. O1000 G21 G40 G99 ; G28 U0 W0 ; G50 X200. Z300. ; T1111 ; G96 S80 M03 ; G00 Z253. ; T1111 ; G00 X50. ; G01 X32. F.5 ; G01 Z38. F.15 M08 ; ..... ..... T0505 ; M03 S80 ; G00 X21...- MaintManAndy
- Post #19
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
I agree, but comparing this to program O1000, which runs perfectly, it is not much different. O1000 goes as follows. O1000 G21 G40 G99 ; G28 U0 W0 ; G50 X200. Z300. ; T1111 ; G96 S80 M03 ; G00 Z253. ; T1111 ; G00 X50. ; G01 X32. F.5 ; G01 Z38. F.15 M08 ; ..... ..... T0505 ; M03 S80 ; G00 X21...- MaintManAndy
- Post #16
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
Ok, here goes. O2000 G21 G40 G99 ; G28 U0 W0 ; G50 X200. Z300. ; T1111 ; G96 S80 M03 ; G00 Z253. ; T1111 ; G00 X50. ; G01 X32. F.5 ; G01 Z46.5 F.12 M08 ; G00 X40. Z253. ; ..... So then it's cut, cut, cut, change tools, cut, cut, cut etc. ..... T0909 ; M03 S90 ; X40. Z253. M08 ; G01 X17.7 F.25...- MaintManAndy
- Post #15
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
We have another program that will run perfectly fine. It will begin cycle again after hand loading a new job. It's the current program we are having trouble with- MaintManAndy
- Post #12
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
Yes, there's two main programs in the machine, let's call them 1 and 2. Program 1 can run and will run over and over again, hand loading new jobs, clamping/unclamping Chuck and tailstock. But program 2 will finish the program, jump back to the beginning, but then won't start the program.- MaintManAndy
- Post #11
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
Yep, both of those are in the program, everything with the program seems to be ok, and has been for a while. The program jumps back to the start, and after loading a new job in, it won't then start the program again.- MaintManAndy
- Post #6
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
I will try that tomorrow, the awkward part is that we haven't had any previous problems with the M30 code.- MaintManAndy
- Post #3
- Forum: CNC Machining
-
M
Fanuc 6t control won't start program again
Hi everyone, I have a Hitachi Seiki 3NE 300 with a Fanuc 6T control. We have had no problem with it for years, but it's been pointed out to me that this machine does not want to start the program from the beginning now, despite there being an M30 at the end of the program. Once the program has...- MaintManAndy
- Thread
- Replies: 22
- Forum: CNC Machining