What's new
What's new
By:
Advanced search…

Search results

  1. S

    Dynapath 10 Keyboard

    I tried contacting them with no luck. I left them a voicemail hopefully I can find out some information.
  2. S

    Dynapath 10 Keyboard

    Thanks again for all of your help I appreciate it more than you know! I attached some pictures to give you a idea. The last second to last picture is the "MTB Interface" which I took out and checked the solder joints along with the last picture I took the far right board out which is the...
  3. S

    Dynapath 10 Keyboard

    I did some looking into the machine. I have had issues with a sticky keyboard for a few weeks and noticed the rubber behind the keys was deteriorating so I decided to replace the key pad with a new one. I just got the keypad in the mail and installed. I normally do not just throw parts at...
  4. S

    Dynapath 10 Keyboard

    I really appreciate the response. I havent had time in the shop to look it over but I will get back at it tomorrow and see what I can find. I really appreciate your input! Thanks again!!!
  5. S

    Dynapath 10 Keyboard

    Hey all, I recently went into the shop to machine out some parts. I fired up my cnc mill and went through the normal process that I do when I went to input my tool offsets I noticed that when selecting the number "2" that it would act as the "clear" button and vise versa however if pressed...
  6. S

    Doall Automatic Horizontal Bandsaw

    Hey guys, I bought a Doall C1213a horizontal bandsaw about a year ago. After having it for a while Ive decided to get it working in automatic mode the previous owners disabled it I bought the electrical schematics and went over the machine but the schematics are vague in certain areas. The...
  7. S

    Do All C-1213a Automatic horizontal Bandsaw

    Hey guys Ive owned this saw for a couple years now and have always ran it manually with no issues. Recently I bought a Cnc mill and have found out why a automated bandsaw would be handy lol. I inquired about a Electrical schematic from Do-ALL but was informed they are currently on backorder 😑 I...
  8. S

    Dynapath to fusion 360 scale factor issues?!

    Hey guys Ive a couple weeks ago I bought a Clausing Kondia FV-1 and have picked up programming with conversational pretty quickly. The machine runs on dynapath delta 10, for being a older system Im really impressed with how well it works! My issue is I have a couple parts that require more in...
  9. S

    Can Dynapath Delta 10 be ran through fusion 360?

    I had a good understanding however I appreciate you simplifying it for me! I suppose my wording/terminology is off which leads to me not quite getting out what Im trying to say. I have made a post but I dont think it has been "translated" properly and my mill doesnt know what the code is trying...
  10. S

    Can Dynapath Delta 10 be ran through fusion 360?

    A little update after messing around with things I finally got the mill to communicate with my pc. I bought a rs232 cable along with a null modem adapter and a db9 to usb adapter. After tinkering with it for about 2hrs messing with the settings in my dnc program (NCLite) I was running out of...
  11. S

    Can Dynapath Delta 10 be ran through fusion 360?

    If you have the time to send me a sample program it would be greatly appreciated! I have the cable in and found that my pc uses com4 for the serial however Im not sure if I should have handshake set to hardware,both or none along with my parity settings and bit settings as well. I will have to...
  12. S

    Can Dynapath Delta 10 be ran through fusion 360?

    Thanks for all the replies guys, this site is a wealth of knowledge its really amazing. Like previously stated I am clueless to this side of machining I purchased a true null modem cable and am waiting for it in the mail. I have a couple small models I have drawn up on fusion and transferred it...
  13. S

    Can Dynapath Delta 10 be ran through fusion 360?

    Hey guys, I am brand new to the cnc world and have looked throughout the forums but Im still coming up short on what is needed to send a program from fusion. I bought a Clausing Kondia FV-1 and have done some small jobs using conversational, I run a small machine/fab shop on the machining side...
  14. S

    Clausing kondia Fv-1 cnc mill Y axis noise? Thrust bearing?

    Thanks for the input guys! After tearing into it I discovered the thrust bearings were shot I looked into purchasing new and they wanted almost $800! Luckily I found new old stock on ebay for the same bearing and picked up a pair for $100 still in the package. I also removed the ballscrew nut...
  15. S

    Clausing kondia Fv-1 cnc mill Y axis noise? Thrust bearing?

    Hello all Ive searched high and low for some information on a kondia fv-1 3 axis mill Ive recently purchased. This is my first post and I really tried to find more information but keep coming back empty handed so this was my last resort. I just bought the mill and have a noise coming from the y...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top