Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
Milling attachment offset base for SB9a
- aametalmaster
- Post #11
- Forum: South Bend Lathes
-
Milling attachment offset base for SB9a
Here is one I used. You can shorten it to suit...Bob- aametalmaster
- Post #10
- Forum: South Bend Lathes
-
10k for sale
I have the same lathe except on a bench. It has been my go to machine since 2006 and it will do anything i need within reason. Just wish someone would make a bolt on headstock with a bigger spindle hole...Bob- aametalmaster
- Post #7
- Forum: South Bend Lathes
-
South Bend Shaper parts and info needed.
Flat spoke 5 1/2" dia is mine with no knob. I have a link for a new light will dig it up...Bob- aametalmaster
- Post #2
- Forum: South Bend Lathes
-
Make own bearings for a 16"
My buddy has a SB 13" for his business and had bearings made local...Bob- aametalmaster
- Post #5
- Forum: South Bend Lathes
-
Boring bar Recommendation for a SB 9
You can never have too many boring bars. I have at least 30 different ones. Some work better than others for different jobs that come in the door..Bob- aametalmaster
- Post #4
- Forum: South Bend Lathes
-
South Bends - Who's Using Carbide Inserts?
I do. Turning, faceing, boring you name it i have used them. I have even ground contours on some triangle inserts for special grooves...Bob- aametalmaster
- Post #3
- Forum: South Bend Lathes
-
Need screw for 6" South Bend / Skinner 4-jaw
I too need to make a screw for a 6" Atlas 4 jaw. I emailed Clausing and they sent me to a local tool company 1 mile up the road and said i had to order from them...Bob- aametalmaster
- Post #5
- Forum: South Bend Lathes
-
Adapting Heavy 10 dials to my 10k?
Anything is doable with enough time, money and bushings. Doesn't your 10K have large dials now? I thought all of them did...Bob- aametalmaster
- Post #2
- Forum: South Bend Lathes
-
Mystery 10" steady reast
Bed clamp and 3 fingers to your door 25 bucks. Not using the stuff anyways...Bob- aametalmaster
- Post #9
- Forum: South Bend Lathes
-
Mystery 10" steady reast
Found a pic of my fingers...Bob- aametalmaster
- Post #6
- Forum: South Bend Lathes
-
Mystery 10" steady reast
I make ball bearing roller fingers for them. I have a pile i never finished...Bob- aametalmaster
- Post #3
- Forum: South Bend Lathes
-
Requesting help with 10K Spindle Thread Protector.
Tap Drill Sizes I bore my blanks to 1.375 . Bob- aametalmaster
- Post #8
- Forum: South Bend Lathes
-
Requesting help with 10K Spindle Thread Protector.
I made a few of these for my end mill holder and my boring head...Bob- aametalmaster
- Post #7
- Forum: South Bend Lathes
-
10K Lathe help
My take on this is maybe some lathe wear. And the fact that you may be cutting the highs of the turned part. Picture a long threaded part. And as you cut the threads you engage the dial at a given point so it stays in the groove. Now you aren't using a dial or line it up at a different spot so...- aametalmaster
- Post #2
- Forum: South Bend Lathes
-
Requesting help with 10K Spindle Thread Protector.
I have a few of them in different lengths and the hole diameters. The short one i use for my boring head to remove it. It has a bigger center hole which doesn't matter for this job. The longer one has a smaller hole to remove a #3 MT dead center without beating it out. I have one for a 6K...- aametalmaster
- Post #2
- Forum: South Bend Lathes
-
Need nose protector/guard for small bore 13 inch
If its a 2 1/4-8 thread i can make you one since i have 2 lathes with that thread i can copy...Bob- aametalmaster
- Post #4
- Forum: South Bend Lathes
-
Need nose protector/guard for small bore 13 inch
Make one. I have made dozens of them...Bob- aametalmaster
- Post #2
- Forum: South Bend Lathes
-
What have you made WITH your South Bend?
5 more pics...Bob- aametalmaster
- Post #704
- Forum: South Bend Lathes
-
What have you made WITH your South Bend?
Muzzle loader barrel rethreaded and a new breech plug made. A guy brought this in and needed it to shoot again. Someone with a hacksaw screwed up the orig breechplug and the barrel threads were buggered up. It was a 5/8" 4 start thread. So i couldn't get the 1" barrel thru my 10K headstock but...- aametalmaster
- Post #703
- Forum: South Bend Lathes