What's new
What's new
By:
Advanced search…

Search results

  1. D

    New Machine Day - Millturn monster

    Should be all set. The I-100 I ran automatically figured the tip at different angles.
  2. D

    Kitamura Data Server

    Yes setup,settings,page down three times, "MCard Editing Function" Change it to 1. Works great now.
  3. D

    Kitamura Data Server

    I got it, there is a parameter that allows editing off the Mcard.
  4. D

    Kitamura Data Server

    No it goes back to the Renishaw program I lose the program when I go to edit.
  5. D

    Kitamura Data Server

    I can get the program to run off the DS. I cannot edit it or restart on a specific tool.
  6. D

    Kitamura Data Server

    Thanks for the info! I get confused. I put programs on the HD but I still have to read them into the "Prog Ram"? I guess I thought I was running out of memory but I thought the HD was where the programs were run from. Is the DS mainly to store one large program on and run?
  7. D

    Kitamura Data Server

    Looking for some info on the Data Server. I have the card installed in the back of the machine. I run out of memory on the HD pretty quickly. Are you guys running from DNC from the data server? There wasn't much in the book about it.
  8. D

    Probing in part program example Renishaw

    Yes it came from Packard. Here it what the apps guy came up with. (ADD THIS TO BEGINNING OF PROGRAM) (pROBE WILL COME IN AND SET Y CENTER, AND X CENTER VIA WEB TOUCH .) G00G91G30Z0. T40M6 G00G90G54X0.Y0. G00G43Z7.0H40 G65P9832 G65P9810Z0.5F100. G65P9810 Z.200 F50. G65P9812 Y.62 Z-.450 S1...
  9. D

    Probing in part program example Renishaw

    I can look and yes I have the macros in the control, EZ set and inspection plus.
  10. D

    Probing in part program example Renishaw

    Yes the probing macros are in the machine. I have one program that has a bunch of cycles in it.
  11. D

    Probing in part program example Renishaw

    So I have a new Kitamura with the Arumatik control and a Renishaw probing package. I’ve never used a probe before until now. I have the inspection plus books. Does anyone have a programming example? I want to probe two separate parts in one set of vise jaws. I would use G54 and G55. I just...
  12. D

    matsuura mc 500 owners

    I had the same problem on a MC500v2. It was a 100 volt ac fan. I bought a 110 or 120 from grainger and made it fit.
  13. D

    Kitamura mill opinions Arumatick jr control

    I think technically the 2gb card is an option? I guess it’s similar from running a fanuc of the flash card? Is the data server also called foreground memory?
  14. D

    Kitamura mill opinions Arumatick jr control

    I ended up ordering the Kitamura. I got the 2gb card? TSC and a tool setter with a spindle probe. I’ve never used a probe on a mill. Seems like the hot setup though.
  15. D

    8mm drill 3.50” deep high qty no tsc

    Thanks for the replies. Yes I just have regular pump pressure. It is 96 holes per part. Potential to do 100 parts.
  16. D

    Kitamura mill opinions Arumatick jr control

    Looking at a Kitamura 4xv mill with the Mitsubishi control. I like the Kitamura part of it but I’m concerned about the control. Is anyone running one of these? Should I be concerned about support?
  17. D

    8mm drill 3.50” deep high qty no tsc

    So I have a job to quote with 96 holes in 6061. I have an older mill with no tsc. I’ve rigged up rotary coolant adapters for insert drills before. Are there any type of tool holders available so I could use a stock coolant through drill? 96 holes per part with a potential for some quantities. I...
  18. D

    Fanuc not ready alarm Victor Vturn 26

    Hi I have a new to me vturn 26. I just powered up the machine tonight. All was well then I got a x axis excess error 414 servo alarm. I checked the switches etc. That alarm went away. Now I get the not ready alarm. The led's next to er 1 and er 2 are lit up. Does any one have any Victor manuals...
  19. D

    Can Dynapath Delta 10 be ran through fusion 360?

    I had a compumill with a dynapath 10. I used bobcad and dnc4u. Fusion has a built in editor or you can choose your own. I’m not sure if the fusion editor sends programs ? DNC4U is my favorite it seems to work with any machine very easily. Bobcad posted out in event format. I’d get the serial...
  20. D

    Programming a bartender as a part stop

    On a lns barfeeder you pick this option on the barfeeder pendant. Like Ox said you can have it retract after the chuck closes etc. I never needed any M codes but I was on a Mazak. Those ran off the chuck open and close signals. It worked ok for me but you had to be careful the pusher didn’t hit...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top