What's new
What's new
By:
Advanced search…

Search results

  1. R

    U.S. Industrial plate roller

    Yeah the outfit that had this machine before us and we've had it now for quite a while, they used to roll plate for trailer roll-off boxes and you can see where they were obviously welding the sheets together and then rolling is what it looks like to me. Granted I do think this machine if...
  2. R

    Colchester Masdiff 1400 parting out.

    Pm sent
  3. R

    Colchester Masdiff 1400 parting out.

    Well let's keep in touch, you did email me a little while back. Do you still have my email? Cuz I remember they were winding up in my spam box?
  4. R

    Colchester Masdiff 1400 parting out.

    I would gladly give you $100 for all that. However there's no way I could get out there to pick it up. Mike
  5. R

    U.S. Industrial plate roller

    Oh it's awesome! All right, let me tell you you do not want to come in here after tipping a few and even stand by that thing. It's scary. Granted the rolls may not be as bad as I'm describing, but I do think they would need to be returned. I'm going to attach a picture of the motor. It's a 20...
  6. R

    U.S. Industrial plate roller

    Yeah I would like to rebuild it. However, at the moment I need something right now, and I think it would take an awful lot to rebuild this, the one thing too the rolls there's big dents and gouges in them from over the years. I would probably have to take them out and get them returned and with...
  7. R

    U.S. Industrial plate roller

    The above pictures are of the machine I have now. I said I would post pictures. You can see and the first and second picture the big worm wheel I'm talking about for raising and lowering the top roll. But the one wheel is all chewed up. The overall length of the whole machine is around 23 ft...
  8. R

    U.S. Industrial plate roller

  9. R

    U.S. Industrial plate roller

  10. R

    U.S. Industrial plate roller

  11. R

    U.S. Industrial plate roller

    Thanks Ries for the heads up. I did just get off the phone them this morning with trilogy machinery. So we're talking. And I am asking lots of questions. Like I said, thanks for the heads up. Mike
  12. R

    U.S. Industrial plate roller

    Turkish and Italian plate rollers have been mentioned, would anybody happen to know any particular brand names to search for? I also came across another brand name Lemas that looks like it may be Taiwanese. Mike
  13. R

    U.S. Industrial plate roller

    As far as the flats that I wind up with, that isn't the biggest issue. I fabricate butterfly valves, 99% of the time the body thickness is only 3/8 of an inch thick. Almost always these bodies that I roll are stainless. 304, 316, 310. Sometimes A516 grade 70, we have done other things in order...
  14. R

    U.S. Industrial plate roller

    A few things are worn out. One is on both ends of the top roll. The eyes that go down to a worm wheel to raise and lower the top roll. I'd have to get actual measurements but the worm wheels are all chewed up, approximately without measuring. I'm going to say there 16- 18 in in diameter The...
  15. R

    U.S. Industrial plate roller

    I think I should have said a pinch pyramid type plate roller is what I have now. I always get about 6" of flat, like I said the machine is very worn out. And it's all gear driven transmission big gears. The top roll is about 12 in diameter. Mike
  16. R

    U.S. Industrial plate roller

    Thanks for the heads up, I knew nothing about that company. I was looking also at a GMC plate roller that looks like they're made in Taiwan, but I was looking for something that could do at least 3/8. I am not up on the names or who's better as far as rollers go. I have an old and I mean old...
  17. R

    U.S. Industrial plate roller

    Hello everyone, just wondering if anybody has any past experiences with the company in the title? They are out of Memphis, and I was looking at one of their plate rollers on their website. The one in particular I was looking at is a 5 ft 3/8 capability roller. Just asking if anybody's got any...
  18. R

    Denford Triton V2NS Virtual Reality CNC Milling Machine

    Would it be possible to get some pictures of it, and did you get any tooling with it? I have a denford cyclone and I love it. If it's easier to email pictures let me know. Mike
  19. R

    Tilt Seal Kit for Forklift

    I don't know if this has been already mentioned, but we talked before as I have a cat v60b also. I have had good luck getting things I need for my forklift from HGM lift parts. I don't know about seals though but I call there and ask for April. Do you have any kind of manual for yours? Mike
  20. R

    Cincinnati Bickford Radial Drill HELP!

    Oh, I figured if you were closer you could come and look at mine. I don't think you'd want to drive to Northeast Illinois. I am about 50 minutes west of the Indiana border. Mike

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top