What's new
What's new
By:
Advanced search…

Search results

  1. C

    For Sale series one Bridgeport 30 taper NMTB arbor replacement

    SOLD on its way to Canada
  2. C

    For Sale series one Bridgeport 30 taper NMTB arbor replacement

    That's is correct , it was a back up for a 1979 CNC Boss. Shows little use. mac,,,
  3. C

    For SaleTool Grinder Project Swiss Schneeberger

    This is a very nice Swiss AG Schneeberger what is left of it, you would need a xy table and tool holder,Probably weights 170# runs nice, all action are smooth. needs a clean up nothing broken or damaged.X movement 8" Z movement 10" columns are all 120 mm, I will include packaged in a good...
  4. C

    For Sale series one Bridgeport 30 taper NMTB arbor replacement

    Pics of Bridge port Replacement arbor About 26 1/8 long also showed a few other demensions and i found t wo new 1' by 30 shell mill arbors 30 nmtb $65.00 for both APT 30 holders
  5. C

    For Sale series one Bridgeport 30 taper NMTB arbor replacement

    For sale. Bridgeport /Textron Series 1 Mill 30 *taper nmtb quick change Erickson tool holder replacement arbor. Good used condition $300.00 + ups contact mac at [email protected]
  6. C

    Hi Mark, Do you by chance have a jafo mill, I am trying to figure out the horizontal arbor...

    Hi Mark, Do you by chance have a jafo mill, I am trying to figure out the horizontal arbor support set up , I have a 32 wfj horizontal vertical. Thanks mac,, [email protected]
  7. C

    Emory Cloth Polishing on Lathe: Correct Technique (to avoid injury)

    Prismont sanding belt holder Has anyone had any experience with the Prismont sanding belt holder? Seems like a nice way to polish if your gonna. Sanding Belt Holder for Lathes - Prismont MST SHB Mac,,,
  8. C

    Emory Cloth Polishing on Lathe: Correct Technique (to avoid injury)

    Prismont sanding belt holder Has anyone had any experience with the Prismont sanding belt holder? Seems like a nice way to polish if your gonna. Sanding Belt Holder for Lathes - Prismont MST SHB Mac,,,
  9. C

    Emory Cloth Polishing on Lathe: Correct Technique (to avoid injury)

    Has anyone had any experience with the Prismont sanding belt holder? Seems like a nice way to polish if your gonna. Sanding Belt Holder for Lathes - Prismont MST SHB Mac,,,
  10. C

    CINCINNATI TOOLMASTER HV Horizontal -Vertical -

    You can split the head if you like and put the end on the face of the ram. mac,,
  11. C

    CINCINNATI TOOLMASTER 1D with Shaper and Riser

    CINCINNATI TOOLMASTER 1D with Shaper and Riser Late model General Specifications serial no6J4V5R-172 Longitudinal travel 22” powered Cross 10” powered Vertical knee 17” powered Quill travel 5” powered 2 HP, 220/440, 3 phase Table size 42” x...
  12. C

    CINCINNATI TOOLMASTER HV Horizontal -Vertical -

    CINCINNATI TOOLMASTER HV Horizontal -Vertical - Universal head General Specifications Serial no 6J4C5M-2 Longitudinal travel 22” powered Cross 10” powered Vertical knee 17” powered Quill travel 5”...
  13. C

    Hi Adam, you responded to a post of mine crashed toolmaster feed. I have gear out it was fun 😁...

    Hi Adam, you responded to a post of mine crashed toolmaster feed. I have gear out it was fun 😁 Could you tell me what gear you used to press on the trad She'd part,? Please respond to my e mail [email protected] Thanks much mac,,,
  14. C

    Cinncy Toolmaster feed crash

    Hi Adam thanks for the thoughtful reply. I have thought about this quite as bit over the years. I have two Toolmasters and the 65 I use for boring mostly. So I could swap drives but it is 220 and the broken drive is 550. You are right on in your comments about removal I am thinking I will tap...
  15. C

    Cinncy Toolmaster feed crash

    Hi Mike... Parts in Part .... cool sent them off an e mail. thanks much mac,,,
  16. C

    Cinncy Toolmaster feed crash

    Thanks Mike, no all running right direction,,,my inattentiveness did it.
  17. C

    Cinncy Toolmaster feed crash

    Greetings Sorry to say my Toolmaster went buy the stop and jammed and stripped out the feed gear. Does any one know of a dealer that has parts for Toolmaster. 60 vintage It is the gear that is driven off the motor to the screw that engages the gear on X axis.. There is a little gear next to it...
  18. C

    Any one have zs instruments DRO?

    Thanks Josh, I have 2 new Fagor DRO one for lathe, one for mill and some sacales but need a few more and can't spring for the big bucks at the moment. thanks for the imput appreciated. mac,,,
  19. C

    Any one have zs instruments DRO?

    ZS SYSTEMS - Digital Readouts (DRO) & Glass Grating Linear Scales
  20. C

    Any one have zs instruments DRO?

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top