Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
T
problems with the home position on vertical mill
ill check into this thanks, and we bring our axis off home too to prevent possible over travels in the mornings- theblacksmith22
- Post #3
- Forum: CNC Machining
-
T
problems with the home position on vertical mill
hi there, I'm having an issue with home my machine and its really stumping all of us the machine is a you-ji YV-600ATC+C now the axis are decel dog homing, so the machine does this intermittently it will home Y position .800 out of position, cycle power to the machine in homes in the correct...- theblacksmith22
- Thread
- Replies: 3
- Forum: CNC Machining
-
T
RS-232 communication issues
i don't know what sub expand is but its selectable for each and every machine the DNC tech they had in here while i was gone must have selected it by accident, its in the portion of the software where you can pick drip feed single block and such. it was on on- on the machine i was having...- theblacksmith22
- Post #19
- Forum: CNC Machining
-
T
RS-232 communication issues
**UPDATE*** Found the problem, the SUB EXPAND was activated on our DNC software. something so stupid and simple that i knew nothing about. thanks for all your help guys- theblacksmith22
- Post #17
- Forum: CNC Machining
-
T
RS-232 communication issues
Everything is set just the way you have listed I changed ports on the PCB from the pc and also made a new cable up I'm agreeing with you that it could be the PCB on the machine I cant think of anything else it could really be at first I was thinking that it could have been something the DNC tech...- theblacksmith22
- Post #16
- Forum: CNC Machining
-
T
RS-232 communication issues
Thanks, i have tried all of that still nothing I'm leaning towards 2 ideas 1, the DNC tech did something that I'm not seeing or my communications board has went out. PRM 111 is set to 0 so my pc is set to 1 stop bit, 112 is 0 which was its original setting. handshaking is Xon-Xoff. and PRM 112...- theblacksmith22
- Post #12
- Forum: CNC Machining
-
T
RS-232 communication issues
dandrummerman21 There's no error I did try to send out as well on the pc just got a bunch of X's I'm using channel 1 PRM 111 bit 0 (SB2) is set to 1 PRM 112 is set to 1 and PRM 113 is 10, and the settings in DNC match this # 10 on the baud rate scale is 4800 that's what my pc is set too. now...- theblacksmith22
- Post #10
- Forum: CNC Machining
-
T
RS-232 communication issues
yes I have tried all, its mind boggling really. I'm stumped- theblacksmith22
- Post #8
- Forum: CNC Machining
-
T
RS-232 communication issues
the port its connected in works I changed ports too same thing, just the program number comes throgh- theblacksmith22
- Post #6
- Forum: CNC Machining
-
T
RS-232 communication issues
different cables for each they are connected to a hub- theblacksmith22
- Post #5
- Forum: CNC Machining
-
T
RS-232 communication issues
no it was changed out about a month ago I had it all working before, unless the DNC tech changed something in the pc but the king that gets me is I run 5 machines off of this one computer and all other machines are communicating its jus this one that is not- theblacksmith22
- Post #3
- Forum: CNC Machining
-
T
RS-232 communication issues
Hello, I'm having an issue with one of my machines communicating all of the sudden, it is a twin horn 1500 mill with a Fanuc OI-MC, so I've done quit a bit of work to this machine over the last 2 months, I lost parameters once and only had 1 back up and it was from 2012 (before my time with this...- theblacksmith22
- Thread
- Replies: 18
- Forum: CNC Machining