What's new
What's new
By:
Advanced search…

Search results

  1. F

    What are You Scraping On??

    This is how it looks after some trys at scraping...and high polished dots are really hard to see, so I mark every one with a permanent marker before I scrape further for more points Login • Instagram
  2. F

    What are You Scraping On??

    Hi Richard and Peter Can I ask one question...why my contact points get really tiny when I scrape with Biax power scraper is this normal. I use blade 90 radius with 10-12mm of stroke for roughing narrower surfaces and then switch to 60 radius and 5mm stroke for further more precise high spot...
  3. F

    scraping procedure/process - have I got a good plan?

    Ok thanks for the info ;)
  4. F

    scraping procedure/process - have I got a good plan?

    Does Peter have a Youtube Chanel?
  5. F

    Biax BL40 green scraper

    Only difference between 564 or Biax original motor to 700 quick was at the 4 flute gear shaft that the shaft is ground to 7mm all the way to the bearing while original has 7mm diameter of gear and then it extends to 8mm before the bearing. But I think that will not alter the performance as much...
  6. F

    Biax BL40 green scraper

    Just to confirm that Metabo STEP 700 quick is direct swap
  7. F

    Biax BL40 green scraper

    I read somewhere that it is..
  8. F

    Biax BL40 green scraper

    I have one more question...how much gape in here is still acceptable. I took this picture from other member, hope he don't mind.
  9. F

    Biax BL40 green scraper

    I think I can call it a happy ending...Ebay seller and I settled for partial refund of 100€ and then bought this Metabo ST EP 700 quick which I think is in good shape for the same amount of €. It even has a stronger motor as original. It's almost a shame to disassemble such a quality jig saw ;)
  10. F

    Biax BL40 green scraper

    HI I have taken speed control wheel apart and found out that there is some kind of silver contact paint which was rubbed off and there was no more contacts to the second pin. I didn't have any paint that could transfer electricity so I think that potentiometer is shoot. Sadly I didn't take...
  11. F

    Biax BL40 green scraper

    Hi I just bought used BL40 scraper from ebay. From the pictures and description that it's fully functional I went for it. Yesterday finally arrived and I was stoked. After checking the box I found two blade holders, because it didn't say they come with it. But then nasty surprise. i turned the...
  12. F

    Deckel LK LKS LKD

    One question to you all Deckel LK owners...Did Deckel made two versions of optical scales? Asking because I can only read to 0,005mm increments trough optical window, while some have micron increments? Do I missed something?
  13. F

    Deckel LK LKS LKD

    Here it is
  14. F

    Deckel LK LKS LKD

    I just want to let you know for those who are searching for special grease for high speed frequency motors from Deckel LK I researched a bit and noticed that Isoflex Super TEL is rated to 1M rpms while this new Kluberspeed bf 72-22 is rated to 2M rpms. So I went with it, im quite shore this...
  15. F

    Deckel LK LKS LKD

    The bearing is S6003 which dimensions are 17X40X12mm. So 40x60.000=240.0000 The hi frequency heads are two types 15-30k and 30-60k rpms From this as I see Isoflex NBU 15 wont do the job. I talked to Kluber representative and he recommended Klüberspeed BF 72-22 grease and he said this grease is...
  16. F

    Deckel LK LKS LKD

    Hi Can someone help me...I'm trying to repack and clean grinding, heads from Deckel LK. Did maybe someone dissembled them and repacked them successfully? I'm having troubles to dissemble the bearing on the tip of the head...everything else and upper bearing I could get out with some tinkering...
  17. F

    Walter dividing head - SHU 4

    I was thinking about to finish it on the mill, but still don't have all the tools for and still getting the feel of it what's capable of, so I skipped that process. It will also be difficult to flycut the surface as the pin is already compressed and glued with locktite.... Will leave it as it...
  18. F

    Walter dividing head - SHU 4

    Hi...Just to let you know I managed to make a backplate for my Walter dividing head. It was not as easy as when you can attach the backplate and finish it on the lathe where it will be well precise. I managed it to get a 0.04mm of run out on the outer side of 160mm chuck. It could be better, but...
  19. F

    Deckel LK LKS LKD

    Hi Chris, thank you....PM sent
  20. F

    Deckel LK LKS LKD

    TNB thanks for the info...found also somewhere in the closet hidden some instructions of this Centricator and I already used it for tramming my bed on the mill. Very usefull tool ��. Now I have another question...found this two odd parallels or something. What could this be...a sinbar?

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top