Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
T
Looking for Help Bringing an Old Scotchman Back to Life!
I’m trying to figure out what size pumps were on these so I can look for a cheap replacement. -
T
Looking for Help Bringing an Old Scotchman Back to Life!
I don’t buy anything new, so I definitely wouldn’t put a brand new power pack in it. Also, have you ever used an ironworker? -
T
Looking for Help Bringing an Old Scotchman Back to Life!
Ha! Thanks for the silver lining! I didn’t take photos of the die sets, but they’re all there. I buy machinery at auction all the time, and I can honestly say this is the exception rather than the rule. I’ve got several starters laying around, so I just need the pump. -
T
Looking for Help Bringing an Old Scotchman Back to Life!
Hello! I just picked up an old Dvorak Little Scotchman (allegedly) at auction, but after getting it back to the shop, I can’t find any badges/model/serial, and the hydraulic pump and electronics are missing. What I thought was a steal is looking to be a long-term project at best. The machine... -
T
Help! Harig Auto 612 Driving Me Nuts!
Thanks for the reply majohnson. I cleaned the lead screw and nut block really well--both had hardened grease on/in them--and the backlash disappeared. The crossfeed handwheel was still acting funky in automatic mode, but I noticed that the wishbone that controls the electronics on this was...- Th961605
- Post #3
- Forum: Abrasive Machining
-
T
Help! Harig Auto 612 Driving Me Nuts!
I picked up a Harig Super 612 last week, and the crossfeed is driving me crazy--The auto cross feed is either stuttering, not completing a rotation, or cycling in the middle of a longitudinal feed (or a combination of all three).There was some backlash when operating manually, so I was ready to...- Th961605
- Thread
- Replies: 3
- Forum: Abrasive Machining
-
T
New to Automatic Lubrication Systems—Not A Circular Loop?
Hello, New to the forum, as well as automatic lubrication systems. I just bought an older Trico Oiler that I’ll be using on an overarm router spindle—long story short, the building vane no longer pumps oil to the top of the spindle to trickle down. I see there’s only one exit point for the...