Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
M
Old Haas VF0 1994, problem with jumping dimmension in Z axis
Hey everyone. I have another problem with my Haas, Z axis have counterbalance , and right now when i tunrn on program after machine make it all Z axis are higher almost 0,3mm. I did program in MDI: G90 G43 T01 M06 H01 G54 G00 Z30. G04 P1 G00 Z150. G00 Z30. G04 P1. G00 Z150. G00 Z30. In... -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Thank you my Lord ! :-) So right now, everyhink is coplete, and i'm back to game! Position in Y axis still jumping in microns, but machine working perfect (i think sometching wrong with procesor board ), and this oem encoders are much better than oryginal one. Thanks for everyone! -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Thanks! But i've already done this ;-) i changed one encoder one week ago, and it's working great, tommorow i should have second one. This oem encoder cost 155$ ( oryginal in haas 400$) and it's fit perfect, only problem it don't have connector. -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
It's not my native language, but i know this language well. I readed Haas manuals, but i don't found answers to my issue, now i know why, my machine have 27 years, and manuals are wrote for new machines. Yes, it's starts spinning, no infromation from Y encoder. Old machines have only MOTIF... -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Ehh.. another bad news, today i connected diffrent tested mofit board, and servo power supply, but nothing changed, this old lady don't listen to me :-( -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Ehh.. this machine have only one switch on axis and it's used for homing, and +/- limit switch and it's working fine. Todey i disconnected Y encoder cable from motif board, but it still change values on the screen: So i'm afraid that motif board are broken :-( but another wierd situation, if... -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Maybe the simplest solution is the best solution, i will check it tomorrow, and tell you what's news. -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
No, it's not possible, i have oryginal renco encoders in machine, i'm from europe, so machine is set in metric dimmensions. As i say before, machine worked fine, but sometimes if i turned it on, and unlock the estop button and reset alarm "servo off" they start running in Y axis before i push... -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Please look at this, tis is The diffrents between X and Y axis. ( it should be reverse encoder, and ref Power? Its wierd because machine works perfect for almost one half year ( it's new in my shop ) . Engines are cold. https://i.imgur.com/M5cEB8X.jpg https://i.imgur.com/ZAuN5w9.jpg -
M
Need Help :-( 1994 Haas VF0 machine starts running in Y, no information from encoder.
Hello, I've got another poblem with my haas. Right now when i'm turn machine on, and i'm push reset button for turn on servos machine starts running in Y axis ( i don't even push power up restart button ), and they ignore even limit switch ! On screen Y position don't change, when i rotate...