What's new
What's new
By:
Advanced search…

Search results

  1. C

    Large Arbor Press

    Please take some close up pictures of the handle release mechanism.
  2. C

    Large Arbor Press

  3. C

    Large Arbor Press

    The hinge on the handle doesn’t look original. Or I have not seen one like this. Also your counter weight for the ratchet paw looks to be missing. It is a joy to use these large presses. Cory
  4. C

    Need Help Vintage Cutler Hammer Magnetic Contactor Heater Chart

    Hello, I have a 1947 Oliver 25 C Pattern Lathe that was 550 volt 3 phase with 4 speeds. The speeds and heaters that came with the machine are: 600 rpm heater H1369 8amps 1200 rpm heater H1361 3.6 amps 1800 rpm heater H1363 4.0 amps 3600 rpm heater H1362 3.92 amps I had the motor rewound to 230...
  5. C

    Monarch 10EE D1-3 Step Chucks

    What Russ made is exactly what I am looking to make. I don't want to modify the lever closer so a new step chuck closer would work the best. Building a Step Chuck Closer from a d1-3 adjust true back plate and adding the 2-3/16" to the front is an interesting idea. That could work. Thanks for...
  6. C

    Monarch 10EE D1-3 Step Chucks

    I called Hardinge and they said the larger collets without the 5c taper was for safety. They don't hold as well if you clamp on the 5c versus the outer taper. They said if the step collet is used in the step chuck, then they will max out at 3000 rpm. They don't recommend using the larger step...
  7. C

    Monarch 10EE D1-3 Step Chucks

    I need to make a shorter drawbar, but I wanted to use the Monarch lever closer and don't want to modify it. I am thinking of making a new D1-3 adaptor that would be longer then all the Hardinge step chucks would work with my lever closer. Has anyone seen a d1-3 project blank? It would have the...
  8. C

    Monarch 10EE D1-3 Step Chucks

  9. C

    Monarch 10EE D1-3 Step Chucks

    I have what I think are Monarch10EE D1-3 5C Step chucks. I have a 3" and a 5". I also have a D1-3 to Hardinge 2-3/16" -10 adaptor but it is too short with the step chuck screwed on it. The Monarch step chucks are about 3-1/2" total length, and the other adaptor is 3" total length. I have an...
  10. C

    WTB Monarch 10EE Multiple Index Face Plate

    I sent a PM to Lucky7 and Ultradog MN. No reply. Please check your PM and respond. Thanks, Cory
  11. C

    WTB Monarch 10EE Multiple Index Face Plate

    Ultradog Could you post pictures of your indexing fixture. If it is a D1-6 and lucky7 doesn't take it, I would also be interested. Thanks, Cory
  12. C

    WTB Monarch 10EE Multiple Index Face Plate

    Could you send me some pictures please. Thanks, Cory
  13. C

    WTB Monarch 10EE Multiple Index Face Plate

    Want to Buy a Monarch Multiple Index Face plate with D1-3. This is used for cutting multi start threads. If you have one you would like to sell, please let me know. Thanks, Cory
  14. C

    DRO on planer- any recommendations?

    Look at this company. My friend has one on his Northfield Planer. Maybe you need to call them to discuss your needs. https://www.proscale.com/
  15. C

    WTB Heavy Duty Belt Grinder, Burr King or Similar

    Look at a Stephen Bader belt grinder. So much more than a Burr King.
  16. C

    Modular 10EE 208V to 240V conversion

    Andy, Reach out to Monarch and ask for help. Try to talk to Scott F and if he doesn't know he can direct you to the right person. I have a 10EE making a pit stop with them right now and they are very helpful with keeping in the loop with what is going on with my machine. Cory
  17. C

    WTB Monarch 10EE Follow rest adapted for DRO

    This is the DRO follow rest. It belongs to a friend. It is much wider to step over the scale mounted on the side. If you have one you want to sell please let me know. Thanks Cory
  18. C

    WTB Monarch 10EE Follow rest adapted for DRO

    They quoted me a price for a new one that is very high. I did think about modifying an existing one, but I didn't want to chop up one that someone else could use for their machine. Your picture does look like there is plenty of material to cut and add on. We will see what's out there before I...
  19. C

    WTB Monarch 10EE Follow rest adapted for DRO

    Looking to buy a Monarch 10EE Follow rest for a 1983 machine. The Follow Rest needs to be the modified version to reach over the DRO. The newer casting is wider in the back. This allows the follow rest to step over the DRO scale. I think these are newer from Monarch. Finding one might be a...
  20. C

    WTB Aloris AXA holders

    Looking to buy some Aloris brand AXA tool holders. Please let me know what you have and how much. Looking for them to be in good shape no projects please. Thanks, Cory

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top