What's new
What's new
By:
Advanced search…

Search results

  1. L

    WTB: Erickson QC30 locknut

    Great, thanks - will do
  2. L

    WTB: Erickson QC30 locknut

    Hi jhov Yes, I've seen those ones, and the associated pricetags. Figured I'd ask here first Thanks
  3. L

    WTB: Erickson QC30 locknut

    Hi all,I found that one of the locking tabs on my Erickson QC30 spindle locknut has cracked. It still seems to work fine, but I'm sure it's just a matter of time before a tool comes flying out at me. Does anyone have one they'd like to sell? Thanks, Lee
  4. L

    FS Cincinnati #2 Tool & Cutter Grinder Tooling

    I might be interested in a cylindrical grinding attachment and a work head drawbar, if you can provide details - thanks
  5. L

    Surface Grinder coolant + dust collection?

    Sounds good, thanks Eric! Looking forward to getting this thing up and running :) Lee
  6. L

    Surface Grinder coolant + dust collection?

    Hi all, for those of you who have surface grinders equipped with both flood coolant and dust collection on the wheel guard, do you use them both at the same time? Or would that make a mess? I've also seen dust collection on the guard at the left hand side of the table - does that work well...
  7. L

    Erickson QC30 nut pin/spring missing

    Hi all I have a Clausing Kondia mill with an Erickson QC30 spindle. The spindle nut is missing the pin, spring, and the longer set screw. I'm still able to tighten up on toolholders, but would like to replace the other parts so the action is correct. Are they standard items I can order? Or would...
  8. L

    Brobo 300 Cold Saw

    Thanks Rob Just sold. Didn't last long! Lee
  9. L

    Brobo 300 Cold Saw

    Yup, cast aluminium Thanks for the info - helpful for whoever ends up taking it. Lee
  10. L

    Brobo 300 Cold Saw

    Brobo 300 Cold Saw for sale This is too far down my to-do list, so it's time to pass it on. The good: - It's complete as far as I can tell, except for a stand - runs smoothly - has a built in coolant pump, and space for a coolant tray/tank under the casting The bad: - the blade guard was...
  11. L

    Parting out Johnson J Bandsaw

    If anyone wants to take the whole thing in its current partially dismantled state, I'll take $200. Otherwise, here are some prices for parts: Handwheel $75 Frame Handle: $25 Balance weight: $50 Downfeed cylinder (not original): $50 Gearbox: $100 Upper wheel: $75 Ring gear: $75 Lower wheel: $75...
  12. L

    Parting out Johnson J Bandsaw

    I started a teardown on this Johnson Model J, with the intent of restoring, but just picked up a nice wellsaw in good condition. The Johnson needs a fair amount of work to get back in useable condition, so it's probably better to part out. Most of the small parts are soaking in evaporust at the...
  13. L

    Using 1/16" shank tools with NSK HES510 spindle

    Thanks everyone Marcus has it right :) I was able to find the 1.6mm collet, just waiting to hear back from the distributor. Marcus, thanks for the info about making the collet. I'll store that in my back pocket for another day :) Lee
  14. L

    Using 1/16" shank tools with NSK HES510 spindle

    I see a CHK-1.6 on the ampco tools website, but they have the imperial sizes listed beside it and (weirdly) it's listed as 1.6mm (0.0629") So I had overlooked it. 1.6mm is actually 0.063, so hopefully it's a typo I'll send them a note to ask about it, thanks!
  15. L

    Using 1/16" shank tools with NSK HES510 spindle

    I didn't see that one (obviously!) Where did you find it?
  16. L

    Using 1/16" shank tools with NSK HES510 spindle

    Hi all, I have an NSK HES510 high speed subspindle in my mill. It came as standard with a 1/8" CHK collet, and NSK offers an optional 1/4" collet. I have a need to use some endmills that are only available in 1/16" shank, but I don't see a 1/16" CHK collet available anywhere. I did find...
  17. L

    Johnson J Bandsaw - vertical mode?

    I got the spring from sawblade.Com, but dake's price wasn't too much higher. The cylinder seems expensive everywhere though Lee
  18. L

    Johnson J Bandsaw - vertical mode?

    Awesome, thanks so much Neil The tension spring was missing, but the replacement arrived in the mail yesterday. That was a very reasonable $65 The downfeed cylinder is another story - the replacement part is around $600, which seems silly so I figured I could cobble together something for much...
  19. L

    Johnson J Bandsaw - vertical mode?

    Hi all, I posted this in general, but it received no responses so I'm trying it here. Please forgive the double post -------- I'm starting a restoration of a Johnson Model J bandsaw, and have a couple of quick questions: - on my saw, the hydraulic downfeed cylinder was completely rusted...
  20. L

    Johnson Model J - pivot angle?

    If this question should be posted elsewhere, please let me know Thanks

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top