Largest Manufacturing Technology Community on the Web
Stay Connected:
Search results
-
B
Okuma Lathe Tape Mode Help!
The memory is super small. I can’t import any new cam file to it- bigrsthe1
- Post #5
- Forum: CNC Machining
-
B
Okuma Lathe Tape Mode Help!
Awesome is there a way that I can check to see if mine has this? What is the routine that you go through to get it to use tape mode? Thanks for the help- bigrsthe1
- Post #3
- Forum: CNC Machining
-
B
Okuma Lathe Tape Mode Help!
I have a Okuma Cadet lathe with the 5020L controller that I just purchased and it runs great but my problem is that I do all my CAM programming in Fusion 360 and import the CAM files via drip feed to my machines with a Titan DNC box. I hooked up the Titan box with the RS232 cable and I can...- bigrsthe1
- Thread
- Replies: 8
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
Thanks for the help and support. I actually sold this as soon as I got it hooked up. Seemed like a really nice machine but after the Makino customer service letdown I didn’t want to own anything Makino ever again. It literally sold as soon as I put it up. I mean they spent more effort writing...- bigrsthe1
- Post #20
- Forum: CNC Machining
-
B
Makino Customer Service Letdown!
Totally. I sold this machine as soon as I got it hooked up correctly because of this -
B
Makino Customer Service Letdown!
So after scouring my manuals for hours I finally discovered that LS28 AKA LS950 is the air pressure switch. I think its really petty of Makino to not just tell me this was what the code meant. They literally told me I had to pay them $2500 for that information. I will never own another Makino... -
B
Makino S33 Please Help!!!
Solved! So after scouring my manuals for hours I finally discovered that LS28 AKA LS950 is the air pressure switch. I think its really petty of Makino to not just tell me this was what the code meant. They literally told me I had to pay them $2500 for that information. I will never own another...- bigrsthe1
- Post #18
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
That is exactly what it was. I scoured my manuals till I found it. Thanks for the help!- bigrsthe1
- Post #17
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
It lets me clear the code but it pops right back up.It doesn't say what it is in the maintenance screen unfortunately- bigrsthe1
- Post #8
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
That all sounds good but answering one question through email or over the phone about what a ls28 code is isn't going to break Makino, especially when its one of their machines. I get paying for a million questions but come on really?- bigrsthe1
- Post #7
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
It is crazy they wouldn't answer over the phone or in the email back to me. I mean it took them longer to reply with that long email they sent than it would've to just say, hey ls28 is this. The maintenance screen doesn't say what it is unfortunately.- bigrsthe1
- Post #6
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
Thanks I've been going through all the switches for about a month now and can find anything.- bigrsthe1
- Post #5
- Forum: CNC Machining
-
B
Makino S33 Please Help!!!
I'm newer to machining and have a few older machines like a Hurco and Matsuura. Anytime I've had a question about something on any of these machines the support line at the companies has been awesome and got me right through my problems. I recently worked my way up (I thought) to a 2005 Makino...- bigrsthe1
- Thread
- Replies: 19
- Forum: CNC Machining
-
B
Makino Customer Service Letdown!
I'm newer to machining and have a few older machines like a Hurco and Matsuura. Anytime I've had a question about something on any of these machines the support line at the companies has been awesome and got me right through my problems. I recently worked my way up (I thought) to a 2005 Makino... -
B
Meldas controller help!
See if these are better. Thanks for the help- bigrsthe1
- Post #13
- Forum: CNC Machining
-
B
Yanac I80 rotaion error help
Yea arcs work for everything else. I'm only having problems with facing ops and a few others when I try to run them.- bigrsthe1
- Post #3
- Forum: CNC Machining
-
B
Yanac I80 rotaion error help
I have a Yasnac i80 controller on a 1993 Matsuura RA-IF Milling center and I keep getting a rotation G code error when I try to run certain programs. I've searched everywhere to find answers but haven't had luck. I import my files through a Titan DNC box. I will post part of my code. Thanks for...- bigrsthe1
- Thread
- Replies: 2
- Forum: CNC Machining
-
B
Matsuura RA-IF wont run after bad tool change, help!
Thanks for all the help! Im glad to know the air coming out of the spindle is normal. The machine runs flawless other than that. I have two machines with pallet changers i'd sell if you really need one:)- bigrsthe1
- Post #17
- Forum: CNC Machining