What's new
What's new
By:
Advanced search…

Search results

  1. C

    EMO

    "9. I saw several Deckel-like mills I had not seen before, all asian. Looked pretty good." You dont happen to have any pictures of those nice looking asian mills? Always interesting to see mods or copies of this kind of perfect machine Best regards Henrik
  2. C

    Singer no longer rebuilds machines????

    Wow that was and old Deckel, Cool! Sorry no answer to your question.
  3. C

    One of the old Thiel for sale showed up

    Just for information, this just came up on the most common sale advertice place in sweden, I have no contact of the seller! https://www.blocket.se/annons/stockholm/frasmaskin_thiel/103475732 Some of us might just think this old Thiel is cool. I do! Best regards Henrik
  4. C

    Abene B-600 right angle attachment

    Hi "Pianoman", Many year ago I had an Abene VHF3 and I did just that! Took off the spindle face ring and turned threads directly on the original one. And it worked fine. If I remember correctly I didnt even had to take the diameter down at all, I just turned the threads directly on original...
  5. C

    Has Abene ceased operations, or just ceased building new machines?

    Hi Spud, Not a clue! on the prices just before they where done or even earlier. Auctionsites like: PS.nu , Toveks and Klaravik are not really like the Ebay. The bidding system works very similar, but the items on the auctions are most always items from a complete bancrupsy where the trustee in...
  6. C

    Has Abene ceased operations, or just ceased building new machines?

    Hi Spud, I just made a bid, but did not won that auction. If I remember it correctly it was on one of the bigger online machine auctions like ps.nu or Toveks maybe Klaravik (all these are swedish websites .(se). I dont remberer that auction had any kind of spareparts for the mills but I do...
  7. C

    Has Abene ceased operations, or just ceased building new machines?

    Yes they are done! I bid on an auction from the leftovers ABENE had after the bankruptcy last year. I think SMT-Swedmill (Swedish Machine Tool)took over the "trademark" ABENE but I´m not certain about that. Best regrads Henrik
  8. C

    Deckel Dialog 4 Monitor vertical deflection dead

    Hello, HAX I also had only one line compressed. This was the topline in the screen. This was solved thanks to Ross "Alfagta" explanation further down in below thread: Error Code 00 & 30 on a Deckel FP2NC with Dialog 4 Maybe this can solve your problem line too? Best regards Henrik
  9. C

    Error Code 00 & 30 on a Deckel FP2NC with Dialog 4

    Hello, I just want to say that removing the X-scale from the machine went very smooth and didnt take more than like an hour with a beer. All Thanks to Ross detailed information in this thread. I thought I needed to remove the complete table but not at all, just follow Ross description and it...
  10. C

    Spindle speed change problems Deckel FP2NC

    Hi "deadmahodude" My NPP90 S1.8 was set to OPEN. I changed it now to CLOSED. maybe that extra milliseconds is all I need? I havent put back the removed springs yet, since I got my X-scale removed and want to finish that first. But I tried gearshifting with this new setting now and it works so...
  11. C

    Spindle speed change problems Deckel FP2NC

    Hi, Well I ended up not buying any original new or used relay. I sort of stopped looking when I saw the prices for a used one. To get a sort of standard relay from a local warehouse!. Its hard for me to figure out if they work the same way. Because these relays are quite advanced with 4 more...
  12. C

    Spindle speed change problems Deckel FP2NC

    Hello, I think you where right, Ross. I took relay K1 out from the cabinett and measured the resistance. The middle connectors was hard to get any contact at all from! Below is the K1 relay, Connact points of the middle one totally gone! So I guess thats the smoking bandit. I will check K2...
  13. C

    Error Code 00 & 30 on a Deckel FP2NC with Dialog 4

    Hi Ross, I got my screen working perfect! :D I think you rememberd those holes correctly. But the one that fixed my problem was the adjustable resistor closest to the screen (closest to the operator). (that one seemed to make the top of the screen taller, (before adjustment it was more or less...
  14. C

    Error Code 00 & 30 on a Deckel FP2NC with Dialog 4

    Hi Ross, Thanks a lot for your deep explanation of my issues. So there might be a saving of my Screen:scratchchin: I will dig into them both and come back when I have results. Best regards Henrik
  15. C

    Spindle speed change problems Deckel FP2NC

    Hi "deadmahodude" and Ross, I did not see that it is a double speed motor. (My electronics skills are limited)But thanks for your explanation there "deadmahodude". And Ross, good tip I will start open and clean K1 and K2 maybe tommorrow? Best regards henrik
  16. C

    Error Code 00 & 30 on a Deckel FP2NC with Dialog 4

    Thanks, Ballen For your tip! I will look into that when I get there! Its a lot of work to get to that scale of the machine. Best regards Henrik
  17. C

    Spindle speed change problems Deckel FP2NC

    Hi "deadmahodude", Yes all 3 phases are there! The spindle brake disengages when I push the white button below spindle stop button. And then I can turn the spindle motor by hand. That is what I do when I trying to change speeds and the machine wont do that. But still, during the start attempt...
  18. C

    Spindle speed change problems Deckel FP2NC

    Hi all, So my deckel is just brought back from the dead. (It had problems electronic problems in some cards) I have never used this machine before so I dont know how/when this problem started. The problem is when I push the spindle start button (Left or right with or without spindle brake on...
  19. C

    Error Code 00 & 30 on a Deckel FP2NC with Dialog 4

    Hi all, Alright here comes the happy ending! (sort of) A few days ago I recived my Deckel brain back from mr "Deadmahodude" I put all cards back and hit the main switch. ....Its alive!:) Screen comes on with Scales showing and no error codes at all. I have zero experience with this machine or...
  20. C

    Who Stole my Spindle?

    Hi all, I know this thread is old, but maybe the missing spindle is not yet found? I see that "Sinusvag" is located in Sweden and this is an Swedish website for selling stuff, see below: Blocket - Sveriges storsta marknadsplats, bilar, bostader, mobler m.m. As you can see the seller also...

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top