What's new
What's new
By:
Advanced search…

Search results

  1. T

    ‘39 10EE tachometer repair

    How would I be able to get Terrie to look up the original owner of my 10EE? Sorry for the off topic reply...
  2. T

    10EE Non startup-solid state drive issue

    Elion EFR-X-1220B Single Phase Rfi Filter 22a 220-240v-ac Is this what you mean by a Ripple filter/Choke? When I search the interwebs for that exact component name I'm not coming up with much luck, but the RFI Filters seem to be very plentiful.
  3. T

    10EE Non startup-solid state drive issue

    2S46F - TRANSFORMER DRY 1PH 2KVA 120X240V-16/32V | Schneider Electric USA 2kva transformer Buck-Boost transformer Acme Electric T181059 | Automation24 .75 KVA transformer FPT SB16N3F 3KVA BUCK-BOOST 120/240X16/32 FEDERAL PACIFIC TRANSFORMERS - Munro Distributing 3kva transformer And Last...
  4. T

    10EE Non startup-solid state drive issue

    Whoops I realized I wrote down 258 vac and not 358. Currently I'm coming off the wall at 246, the combination of the (4) aforementioned transformers would get me to a nominal 358vac. Maybe I should proofread a bit more :typing:
  5. T

    10EE Non startup-solid state drive issue

    These are the transformers I have found. It would take all three of these, plus my current transformer to get me at 258VAC with a combined KVA of 5.78 which is plenty for the 3hp setup.
  6. T

    10EE Non startup-solid state drive issue

    I found a few second hand transformers. One is 3 KVA 16/32, one is 2KVA 12/24 and another is .75 KVA 16/32. All three of those in conjunction with my current one would get me to 358 volts and I could get all three of them for probably $100 total
  7. T

    10EE Non startup-solid state drive issue

    Where do you see 320 to 360 VAC in the specs? Wouldn't I be able to come in on the 120 low voltage side and "buck" the voltage up 120VAC? or is that incorrect, which i have no knowledge of these things :nutter: "Patience, Grasshopper" Haste empties wallets faster than it brings joy. I...
  8. T

    10EE Non startup-solid state drive issue

    Cheap spot is still a 5 KVA 240 => 240 plus around a 2.5 KVA or so 240 => 120 and yer right about 360 VAC and plenty of balls for a cool running Daily Driver. that should work for exactly what i need, i am finding some eBay rigs for around $150-$200, shipped would be around the $250 total...
  9. T

    10EE Non startup-solid state drive issue

    Jefferson Electric Transformer 211-0111-055 5 KVA 240/480 Pri 120/240 Sec TEST👍 | eBay Is it possible to use this one in reverse to Buck the voltage up 120V? even with shipping id be in $290 so its not terrible...
  10. T

    10EE Non startup-solid state drive issue

    https://www.ebay.com/p/1401830676?iid=274716193139 Would this transformer work for my needs? the only thing I am missing here is how is this boosting the voltage? I am finding 5 kva transformers but am unable to find any that have a secondary voltage boost rating.
  11. T

    Monarch 10ee retrofit

    Rabler, I would be interested in any advice you're willing to pass along! -Hunter
  12. T

    10EE Non startup-solid state drive issue

    Do you have any photos of it all packaged up in the base of the 10ee? I found a 514c-16 from an eBay scrapper for $350 from China. Which I'm gonna low-ball with some make offers and see if they'll bite. If I could get it for $150 it might be worth the gamble :typing:
  13. T

    10EE Non startup-solid state drive issue

    Thanks for the advice. So essentially I could go 514c-16 and a few odds and ends to at least make the bitch run. Then I can slowly piece part in all the necessary upgrades until I have it back to factory specs. Group sex with dirty contactors is what got me here and it's been no fun...
  14. T

    10EE Non startup-solid state drive issue

    Power Systems 5820-00-H07-4180-0-21-A 7.5KVA PH 1 240/120V Isolation Transformer | eBay I've thought about making an offer on this one, it's only a couple hours from me in Virginia and would suit all of my needs. If I go this Parker 514c-16 route I will likely piece part it all so it isn't a...
  15. T

    10EE Non startup-solid state drive issue

    I will definitely have to read into this process. Thank you for being patient with me as about all of this is way over my head but I am trying to understand it all :ill: So if I am understanding this correctly, I need to upgrade to a 5kva minimum transformer?
  16. T

    10EE Non startup-solid state drive issue

    Jefferson Electric 416-1100-000 Buck Boost Transformer | eBay Is this considered an auto transformer?
  17. T

    43 10ee MG with Parker 514c-16 DC Controller

    I'm also very interested in any more information on this setup!
  18. T

    10EE Non startup-solid state drive issue

    The parker eurotherm 514C-16 seems to be the best option. especially if I don't need to run my 10HP rotary phase convertor to use it, this would be reserved for my Mill and any other 3 phase equipment I will acquire down the road. Which will greatly cut down on noise in the shop when using the...
  19. T

    10EE Non startup-solid state drive issue

    I believe you're onto something here. I will do some testing on the motor to be sure of it's function before deciding on the next plan. But just by looking at the condition of it I'm certain it will check out good. As for the drive, I don't think it is worth testing. it is doing the exact...
  20. T

    10EE Non startup-solid state drive issue

    Well it's not everyday a 75 year old breaks up with a 29 year old.But today is one of those days! I'm unsure if I'll even test this controller at the plant (I had approval to do so) It may be better to clean the 10ee up and start figuring out my next moves for it!

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top