What's new
What's new
By:
Advanced search…

Search results

  1. U

    HST210SS 5. 4011 Alarm. A-AXIS ROTARY BRAKE ENGAGEMENT FAILURE

    The only time we had the brake issue was when the wires were messed up. Sorry for your troubles.
  2. U

    HST210SS 5. 4011 Alarm. A-AXIS ROTARY BRAKE ENGAGEMENT FAILURE

    Are the wires for the unit all original, or were they replaced recently?
  3. U

    Genos 560v prices and options

    They can easily make the conveyor operate with a button and m code and they can also set up a chip wash down hose
  4. U

    Genos 560v prices and options

    We had controller issues and the machine would not work all the time. Gosiger replaced the front panel and some board and it works great now. Compared to the vf 2 that its next to its fantastic. Fast big sturdy
  5. U

    Genos 560v prices and options

    Hello. We got it at around 135 on the floor. With tax and delivery. Conveyor, and probing.
  6. U

    Compressor questions. Specifics on the screw

    Hello. I recently got a new machine that requires about 18cfm. I would really like the idea of a screw compressor because its quiet and has a dryer in it. My questions are these; Apparently the screw compressor needs to have a 100 percent duty cycle. The machine when sitting does not really use...
  7. U

    Okuma M660V real price?

    We saw a discount of roughly 40 k on the 560v Genos.
  8. U

    Activate and deactivate auger during a program in an okuma while running a program?

    Hello. I was wondering if you could tell me how I could activate the auger in my mill during a program run it for a few minutes and then turn it off without coding it every time and using an m codes. The machine is a Genos 560v the controller is the osp 300. Thank you
  9. U

    Through spindle coolant suppliers.

    Perfect. Thank you.
  10. U

    Through spindle coolant suppliers.

    Thank you. I think buying a brother for our new 560 v to be used as a tsc pump would be slightly more expensive than just buying the pump for us. But it is a good idea of being able to use one pump for multiple machines. I have air blast through spindle as well. Still hoping to find an off the...
  11. U

    Through spindle coolant suppliers.

    Hello. I think it's all setup. What I need is the high pressure pump and filter.
  12. U

    Through spindle coolant suppliers.

    Hello I was wondering if there are through spindle coolant options that can be obtained without going through the supplier. I have now an okuma Genos and am interested in exploring options.
  13. U

    Going from Fusion 360 cam to NX cam, where are simple workflow tutorials?

    Hello. There is a tool path option that is driven by curves. Planar profile. You can also probably do the wall one. The driven by curves likes the curve to be at the top. Trim boundary specifies what to ignore or whether it cuts outside or inside of a specified contour.
  14. U

    Another coolant thread. Keep using MB50 or change.

    Hello. I read most of the coolant threads on this forum. I have a more specific question. I just got a new mill. Should I keep using Castrol mb50 or change? I have it in 2 other machines and it's works perfectly well. Can sit for a long time, no rust, no smell. But it's not fancy or new. Should...
  15. U

    Going from Fusion 360 cam to NX cam, where are simple workflow tutorials?

    Hello. The template process in nx is difficult and complicated compared to fusion. This video shows it . When I ran nx I would just copy and paste the operations I liked into a blank document and then copy and paste them out when I needed to reuse them. This seemed to work. I would say that i...
  16. U

    Best YouTube Cad tutorials?

    Hello Wolfgang Walden is good. He uses a bunch of cad software and shows how to do the same thing on all of them so you get to see the differences. Biz learn for nx is great. Andy Schafer at acuity for nx cam is great too Then there is an English cocky guy for inventor and a guy named Lars...
  17. U

    Genos 560v prices and options

    Yes. I think so
  18. U

    Genos 560v prices and options

    Hello. Thank you. For us its looking like a 6k difference for the dnm 5700s. Though it has some tsc I am still leaning towards the okuma.
  19. U

    Genos 560v prices and options

    I saw that at one shop that I visited. I was thinking of doing that as well. Also I saw saunders put a light in the tool changer
  20. U

    Genos 560v prices and options

    Thank you. What is aot? Good point I will ask about m codes and all that stuff.

ABOUT PRACTICAL MACHINIST

With more than 10.6 million unique visitors over the last year, Practical Machinist is the most visited site for metalworking professionals. Practical Machinist is the easiest way to learn new techniques, get answers quickly and discuss common challenges with your peers. Register for the world’s largest manufacturing technology forum for free today to stay in the know.

Learn more about us.

STAY CONNECTED

Facebook Instagram YouTube LinkedIn Pinterest Twitter Tiktok

Register Become a forum member. Register today.

Sign Up Sign up for our e-newsletter.

© 2023 Copyright Practicalmachinist.com. All Rights reserved.

Top