What's new

Search results

  1. L

    Unknown backplate

    I have a 4 jaws chuck 6¨ with a back plate, but I don't know which one, I suspect a Bison DIN 702 4 studs Not a camlock But I can't find a drawing with dimensions anywhere
  2. L

    Krautkramer Hurth V1, 50433 Steel Angle Beam Standard Calibration

    Hello Can anyone tell me what this is used for? I have no idea
  3. L

    Herbert or Coventry die head

    I have a lot of new thread chasers,(over 150 sets)different sizes For the 1/4 inch (Dimensions of the chasers 3,9 x 7,94) I have no die head, and it seems to be impossible to find If anyone is interested in those chasers, here a list, all are new, Different types and dimensions Alfred Herbert...
  4. L

    Isoma Centering microscope

    I found this Isoma centering microscope in a drawer Here the discription from ISOMA M156130.4V-400 S40-VM with front view, Shockproof eyepiece angled at 30°, integrated rotating goniometric head 360°, reading on vernier 10' graticule S110-15-001 with continuous cross lines and 16...
  5. L

    Tangential type dies

    I have a few sets of new Tangential type dies Before i list them, i want to know if somebody is interested Different sises
  6. L

    Difference between ANC and UNC thread

    I have acquired a quantity with Die Chasers There are ANC and UNC with the same thread etc, I can't find the difference between on the internet Does anyone know if these are identical, or where can I find it
  7. L

    Any idea what this is?

    Other pictures I cleaned up a special device and took some pictures. Internally there are 6 different spirals, marked with 80, 100, 120, 160, 180 and 200. With the pin on the side, by pressing, you can choose to take the path of one of these spirals with you. On the front there is a cylindrical...
  8. L

    Any idea what this is?

    I cleaned up a special device and took some pictures. Internally there are 6 different spirals, marked with 80, 100, 120, 160, 180 and 200. With the pin on the side, by pressing, you can choose to take the path of one of these spirals with you. On the front there is a cylindrical hole of 16 mm...
  9. L

    NTF milling cutters

    Hello, I have a large lot of new carbide cutters from the NTF brand, but I don't find any information on the internet Is there anyone who knows which manufacturer these are?
  10. L

    Albert Gnehm-100 hardness tester

    Hello, I bought a vintage Albert Gnehm-100 hardness tester, but i don't have a manual Anyone can help me?
  11. L

    CBN and PCD turning inserts

    Still man CBN inserts for sale, shipping to USA is not that expensive, Up to 50 grams = $1.7 100 grams = $5 350 grams = $10
  12. L

    WTB: Horn 105 & 114 lathe holders

    Horn With the home made Horn 105 you can fit Horn Supermini, and / or diameter 4 / 5 / 6 on one side and on the other side 7 OR 8 mm Professional hardened at 50 HRC and black colored The carbide Horn M311 and Simtek S14 are new, and not cheap!! As you look to the pictures of the Horn 105, you...
  13. L

    WTB: Horn 105 & 114 lathe holders

    Hello, I have a home made Horn 105 for sale, new with more then only Horn to fit on Also new carbide tool bodys Horn M311.0016.00B Simtek S14.1609.33
  14. L

    CBN and PCD turning inserts

    Still many CBN inserts for sale
  15. L

    CBN and PCD turning inserts

    Still many CBN inserts for sale
  16. L

    CBN and PCD turning inserts

    Still many CBN inserts for sale
  17. L

    CBN and PCD turning inserts

    PCD / VCGW1604 are sold
  18. L

    Habegger DLZF/DLZTE gearbox removal

    Hello, I have the same lathe i think, for removing the gear box, you have to remove the cover with the gears There are 2 hidden screws behind, the other ones are visible After removing this cover, i drilled 2 extra holes in that cover so i can remove the whole gear box complete without removing...
Back
Top