What's new

Search results

  1. clay27bsouthbend

    Calling all South Bend 11's

    Hi Ray BXA was suggested to me. More of a common size and a lot of options.
  2. clay27bsouthbend

    Calling all South Bend 11's

    bjt0055 I just wanted to add some of your info with the pictures. Model 363-Y serial number 32,157 If you could add some dimensions of the holder may help others in the future.
  3. clay27bsouthbend

    Calling all South Bend 11's

    Looks nice Frank what is the model number?
  4. clay27bsouthbend

    Calling all South Bend 11's

    My 27B is 1.185" OD with 3.150" travel.
  5. clay27bsouthbend

    Help me wire this damn drum switch

    Dang it! Can you get us pictures of the drum switch? Drum switches are not all the same. I'd like to confirm the R-1 schematic is correct for the switch you have. If you can't bare to look at it for a while I sure understand.
  6. clay27bsouthbend

    Help me wire this damn drum switch

    Yes. I don't see a make and break for the 110 volt. I would mark the wires coming off the terminals and the extended wires to keep them straight. Not sure how the motor would like being connected terminal to terminal and wire to wire. Might just let the smoke out.
  7. clay27bsouthbend

    Help me wire this damn drum switch

    Get back to square one. Make sure the motor runs on 110 volt. Wire direct to the motor, don't wire in the drum switch yet. Then when it runs, double check it reverses with the red and black in the motor switched. When that all checks out lets get back to the drum switch. You are only switching...
  8. clay27bsouthbend

    Calling all South Bend 11's

    Anyone got some new pictures to get this back on track?
  9. clay27bsouthbend

    Calling all South Bend 11's

    Nice 184B serial number 53371 More pictures at Photo Index - South Bend Lathe Works - South Bend 11in lathe | VintageMachinery.org
  10. clay27bsouthbend

    Southbend 27-B Happy Birthday 100 years old.

    The date cast in the bed is 3-21-21. If you look below the chuck in the first picture you can see the date. Which what I understand is the date they can use it on or after for reasons of letting it season. Did they think when she was built back then that she'd still be around 100 years later. I...
  11. clay27bsouthbend

    Calling all South Bend 11's

    Saw a 84 on another site. Sewing Machine Nut: 1929 South Bend 11-Inch Lathe With Quick Change Gearbox
  12. clay27bsouthbend

    Help with South BEnd

    Is this what you have?
  13. clay27bsouthbend

    Calling all South Bend 11's

    SB27A Do you have any pictures and info on the bearing build?
  14. clay27bsouthbend

    Calling all South Bend 11's

    How to Run a Lathe 1941 Good watch for some help on how the lathe works. https://youtu.be/gIH6SAXWR5A
  15. clay27bsouthbend

    Calling all South Bend 11's

    Hi Jade Without the Apron and cross feed it isn't much good for anything but parts. I can't see much in the attached photo. If you get it let us see some better pictures. If it is a model 84 take look at the other post for that model. Good luck
  16. clay27bsouthbend

    Calling all South Bend 11's

    I made up a list of the various models posted with pictures on this thread. I'll give the model number and post number. Model 27 post 10,171,286,287,290 Model 32 post 160,194,195 Model 33 post 261 Model 63 post 144,148,149 Model 84 post 27,80,81,86,151,214,274 Model 111 post 208 Model 333 post...
  17. clay27bsouthbend

    Calling all South Bend 11's

    1933 Tool room lathe
  18. clay27bsouthbend

    Calling all South Bend 11's

    OK my list of 11" lathes had 12 models. Tonight I came across catalog #93 dated 1933 it has 18 different model numbers. Everything from bench mounted counter shaft drive to Tool Room with 3-phase motor. Here's the numbers as I wrote them down. 84, 33, 32, 484, 433, 432, 184, 133, 132, 384, 333...
  19. clay27bsouthbend

    OT SR-71 LA Speed Check

    Best hour 10 minutes and 56 seconds spent. WOW
  20. clay27bsouthbend

    Calling all South Bend 11's

    https://youtu.be/vrXBkqC6ttc I hope this works, never added a link. I found a 1931 84-A 11" Southbend rebuild. Part 2 https://youtu.be/5OZCz4oyo8c Part 3 https://youtu.be/08RjmGuYj6E Part 4 https://youtu.be/bjYY1bcOgu0
Back
Top