What's new

Search results

  1. B

    VF-2 spindle tool release issues

    It was built in 2022…maybe 2021. I’ll do some research into the solenoid. Thanks :-)
  2. B

    VF-2 spindle tool release issues

    I do leave the spindle empty, and periodically clean the bore. I’ll try the other tips, and will check the video. I hadn’t found that one before. Thanks for the feedback :-)
  3. B

    Solid models of Haas machines available ? Where ?

    Machines, TL-1, machine info, technical documents https://www.haascnc.com/machines/lathes/toolroom-lathe/models/tl-1.html
  4. B

    Solid models of Haas machines available ? Where ?

    Haas has nice models for my VF2SSYT. Not sure what they have for lathes. I think if you go to the Haas website and go to the page for the machine you want, there will be a link to the model.
  5. B

    VF-2 spindle tool release issues

    I’m having two, possibly related, issues with the tool release on my VF-2SSYT. When manually inserting a tool holder, sometimes the mechanism takes a long time (like 20-30 seconds) to grab the tool after I release the button. I can hear some air flowing while waiting for the sequence to...
  6. B

    VF-2SS X axis power up

    So I opened the way cover yesterday and had a look. Everything was clean inside and no obvious problems. The sensor actuates properly to metal. Unfortunately, I wasn’t able to observe the sensor with the table moved to the home position without taking off a bunch more covers, and I ran out of...
  7. B

    VF-2SS X axis power up

    Good info. I’ll check the X-axis proximity sensor next week and report back. Thanks :-)
  8. B

    VF-2SS X axis power up

    I have a 2021 VF-2SSYT. On startup, the X axis drives against the hard stop often for as long as 30 seconds. The Y axis doesn’t do this, and it seems like the X axis didn’t take this long originally. I feel like this isn’t how the home routine is supposed to work, but I don’t have a machine to...
Back
Top