What's new

Search results

  1. D

    How to determine spindle part # 98 HS-1rp

    I have a 98 HS-1RP and while I was tracking down some leaks on the lub panel I mixed up some of the air lines. I had put tape on them and the corresponding fittings, however the oil that was all over everything allowed the tape to fall off. anyways I looked up the service manual for my machine...
  2. D

    DPRNT to control Arduino based rotary over serial.

    I was searching around on eBay and came across an interesting little trunnion table, link below. I had seen similar units, but they all used belt drive reductions, which from experience will not have enough reduction, and will likely be chatter with any real cutting, not to mention the belt is...
  3. D

    3 Phase Package AC unit, run the compressor on a vfd and convert to single Phase.

    I purchased a used 3 phase package AC unit for my home shop. I also recently moved, and when I bought the house, I noticed there where 3 phase power lines very close to the property. I figured it wouldn't be much to have the power company setup a transformer and run 3 phase to my property...
  4. D

    Haas 1998 HS-1RP Troubleshooting(repost)

    Summary: I'm trying to trouble shoot an AUX AXIS DISCON error displayed by the control, and some of the axis's are jammed. Here's the background on the machine if it helps: I recently purchased a Haas HS-1RP through a broker, meaning he knew very little about the machine and I wasn't able to...
  5. D

    Haas 1998 HS-1RP Troubleshooting

    Summary: I'm trying to trouble shoot an AUX AXIS DISCON error displayed by the control. Here's the background on the machine if it helps: I recently purchased a Haas HS-1RP through a broker, meaning he knew very little about the machine and I wasn't able to talk to the previous owner. I got it...
Top