What's new

Search results

  1. A

    VM10Ui "A" axis following error

    There are some settings in Winmax that let you tune how much follow error there is , its set very tight as per factory and is usually a good indicator that something is not quite right if it has been able to perform like that in the past . We had a similar thing on one of our Z axis and we had...
  2. A

    Hurco VMX30 Boot issues - Ultimax 4

    Just to bump this a little , if there is anyone in the North Yorkshire area near Easingwold that does know how to figure this out , we have tea , coffee , cash + VAT whatever is needed to get her up and running again :)
  3. A

    Hurco VMX30 Boot issues - Ultimax 4

    Hurco VMX30S - ultimax 4 control , dual screen This machine has been a trooper , power it and it turns on without fail untill.................. I left the machine off for a short while , 3-4 weeks , upon power up , we get so far through the boot process then we hit a stop . There is an...
  4. A

    Duplomatic BSV-N160 tool changer error Harrison Alpha U

    Turns out everything was perfect on the machine , new control board needed , problem solved .
  5. A

    Duplomatic BSV-N160 tool changer error Harrison Alpha U

    The whole turret is not in bits... yet ! I did already want to have a poke around in there , the last lathe suffered chafing wires in the tool change unit so i wanted to check that they were all still good. Also the coolant was not passing through the tool post properly , the centre height is...
  6. A

    Duplomatic BSV-N160 tool changer error Harrison Alpha U

    Having worked a Harrison alpha lathe for a good while employed, had the chance to buy one recently so went for it. The size of the machine and control is ideal for what we want to do. Its been installed and cutting metal for long enough for us to know mechanically all seems/seemed to be ok...
Back
Top