What's new

Search results

  1. C

    Fanuc robot to Fanuc CNC Integration

    Thanks for the info! We will contact him in the morning. Hopefully he can tell me where the m20 output from the machine is and what input we need to plug in to to tell the machine the robot is finished; if we need that? Might just need a cycle start. I'm sure your integrator will be able to...
  2. C

    Fanuc robot to Fanuc CNC Integration

    I've looked through our electrical Diagram that came with the machine and I found where the Mfin signal is supposed to be hooked into. Just for reference, it is X22.0 on Module CE56 and the same for the robot loading call Y22.0 on the same board. I do not have this board on my machine. You...
  3. C

    Fanuc robot to Fanuc CNC Integration

    I know the Haas has the Mfin signal stuff; but does the Fanuc controller?
  4. C

    Fanuc robot to Fanuc CNC Integration

    We just finished integrating one of our Haas machines with a Fanuc robot; all in all it wasn't too bad. Haas has a really good integration guide that helps get things set up in the right order. We are ready to start integrating our 2nd fanuc robot onto a DNM 5700. There are several things that...
  5. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    I got this working on Tuesday and forgot to get back on here. It is working as expected now. dandrummerman21, your suggestion of setting the X Argument to 0 worked. I had to fix a couple of other things as well, but it is working. I also ended up talking to Renishaw later that day. It...
  6. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    Yes, that would make sense to what I'm seeing. I did change my current offset to G59 and then set G59. I did notice I had it still in G54 and changing the G59 offset, so I changed that with no luck. I will try your edit once the machine is available. Running parts right now. I should have...
  7. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    I had some weird stuff going on when I ran my program the 2nd time. It moved in a negative direction (which is what I want) but once it set the work offset and I ran it again to see if anything changed it ran in a positive direction. I changed my #24 to #24 = [#5041 -0.05] to start it going in...
  8. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    Yeah, I have the one set to G54 because it works in the machine; I was just testing with G59 on the other program. I though about getting into the 9023 to change the overtravel, I was just hoping to avoid that. I will see if I get the same value for the probe strike position on each program...
  9. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    My Dad made a program in C++ to make the gcode for this specific product; so I'm able to get information from these inputs that generate the gcode to make my macro arguments without any additional input from the operator. I can have the Chuck spacing hard coded since it isn't going to change...
  10. C

    Probe for X Offset starting at a machine position. Long Probe Distance.

    To start out, here is our setup. Using a 03 Haas with classic controls. We put a part on the rotary table and probe for our X Offset on the biggest OD of the part; the position from the 4th axis chuck and the body we are probing varies from part to part. I made a macro that allows the operator...
Back
Top