What's new

Search results

  1. P

    FP 1 Dismantle

    Machine is finally up and running, still have to do the gibs adjustments though. Since I gutted the table feed, I started thinking on how to come up with a way to attach a 14nm NEMA34 motor in there. Shaft is too short and motor is taking quite some space in there. I thought of something...
  2. P

    FP 1 Dismantle

    Thanks a lot, since the holes are not very clean and I did not want to drill them to clean or anything like that I left them like that till I figure out if the inner surface is threaded. Since I know now, I can go ahead and clean them and make some pads!
  3. P

    Tos s28

    Hi all, I recently bought a new(old) tos S28, there is a PDF manual in English which I found on the web but some pages are not very readable. I was wondering if there is anyone who has the original English manual or a better copy than I do. Cheers Poyraz
  4. P

    Deckel High Speed Head Reversable?

    I hate everyone that has all those cool accessories :D I am envious!!!
  5. P

    FP 1 Dismantle

    I cleaned the oil from the base casting, run the machine at 750 RPM as recommended and seems to be fine. Only thing left is to clean the vertical head and attach it. There are tons of posts about the oil topic, but I still don't get how the bevel gears gets lubricated, oil nipple(K) and grease...
  6. P

    FP 1 Dismantle

    Sorry for the late reply, I had to modify the part a bit and printing and tryouts takes time :) but final version fits perfectly. STL file can be found below and if someone is interested in the fusion360 file for further modifications, please send me a dm. I printed it out of PLA and coated...
  7. P

    FP 1 Dismantle

    This seems like a quite a big effort for such simple part, its not as detailed as the skull so simple sand casting would probably be ok. PS. I ended up watching several other videos of that dude, pretty cool :D
  8. P

    FP 1 Dismantle

    I 3d printed it since some already indicated it does not have to be made of metal. I also painted it with couple of coats of PU paint should be just fine. I will share it on thingiverse since you are already the second person needing it. With slight change can be also used as a template for...
  9. P

    FP 1 Dismantle

    It did fit in place, radius of the part could be smidge smaller but can't complain. I gave it couple of coats of PU paint and will confirm the results during the weekend. And I can share the part with you once I believe its ok. I've been also degreasing and oiling it along the way. Also got rid...
  10. P

    Deckel FP1 arbour retaining nut

    All good, I received a lot of help from the community, good to be able to give back sometimes.
  11. P

    FP 1 Dismantle

    So, most of the problems are solved. I could not clean it as thorough as I wanted but don't have time to go any deeper. Any suggestions on how to push the wicks through oil channels? Also, to y axis oil plate had some sheet of paper looking thing to stop oil from leaking, is it OK if I use...
  12. P

    Deckel FP1 arbour retaining nut

    Here you go, if you need any other dimensions feel free to ask, I am taking my machine apart currently so everything is everywhere :willy_nilly:
  13. P

    Deckel FP1 arbour retaining nut

    I'll be away from home till Thursday next week, once I am home I'll make a sketch and send it to your way.
  14. P

    Deckel FP1 arbour retaining nut

    Is this the nut you need the dimensions of?
  15. P

    TOS FN22 manual scanned

    There is a Czech site where most of the Czechoslovak machine manuals can be found Manualy a navody k obraběcim strojům | TumliKOVO:Technologie strojniho obraběni kovů
  16. P

    FP 1 Dismantle

    Correction, it is m18x1 and I could not find off the shelf item with that specs, they have 17x1 and next size is 20x1. I made like 4 of them, in case similar size is used elsewhere on the machine.
  17. P

    FP 1 Dismantle

    No, I did not actually. I wanted to manufacture them because I am really bad at cutting threads on the lathe and looking for excuses to practice. PS. Just checked out of curiosity, it costs around 3€ M20x1 Poyraz
  18. P

    FP 1 Dismantle

    So, I finally received the bearing and 56 teeth mod1 spur gears I needed for the lathe to be able to make the missing nut. Usually the case... From (almost) compete set of change gears only ones I was missing were the ones I needed. I also made an attachment for the shaper so I can cut the...
  19. P

    Deckel Literature Free

    Bruce can have them if he agrees to share the content with me 😜😜😜
  20. P

    FP 1 Dismantle

    Shaft has some room to move back and forth if you don't have the front nut so the #7 post from me has a photo where it is pushed back, and the gear was hold in place by the contact of the gear within the vertical head which caused the bearing to wear unevenly probably Great tips again thanks...
Top