What's new

Search results

  1. K

    Cheap Deckel and a new level of auction format?

    I do not believe that, you just build a new shed, right? All it takes is a new setup of the machines you already have.
  2. K

    Cheap Deckel and a new level of auction format?

    Another one: https://www.marktplaats.nl/v/doe-het-zelf-en-verbouw/gereedschap-freesmachines/m1859660222-freesmachine-cnc-4-de-as I am not in the market for such a machine as I consider them too old and almost impossible to repair. I really like the newer the DMU series but that is not the...
  3. K

    Schaublin 125-CNC retrofit:

    The result of the castings looks very good to me. Now this is just a plate but now you can also make a new steady for your 125 where casting is almost a need. To bad of the crash. On my CNC I do have a potmeter knob for both feed and rapids , when running a new program or tool I start with...
  4. K

    Why Can't I see images anymore?

    Who is the admin for this matter?
  5. K

    Why Can't I see images anymore?

    I sometimes see these tumbnails which I can magnify but not always. For example the last 2 post from you guys is text only. ( for me)
  6. K

    Why Can't I see images anymore?

    No pictures to see.
  7. K

    Why Can't I see images anymore?

    I can see the thumbnails but if I click on the lathe, no picture.No mention of "you do not have permission" . Others do work. In here: Taylor-Hobson Talyvel 4 I do see some of the pictures Bruce posted but not in his last post.
  8. K

    Why Can't I see images anymore?

    I does not make a difference if I am logged in or not. I can see the beaver. I think the problem is with pictures hosted on PM.
  9. K

    Why Can't I see images anymore?

    Same problem here.
  10. K

    Deckel Quality Control fail

    Lack of space is the best do-not-buy-another-machine medicine.
  11. K

    Deckel Quality Control fail

    Sidenote: are you fulltime on the Deckels now?
  12. K

    millplus v330 manual tool change in program

    You can not load manual tools allocated to the toolchanger. If you have for example a 24 tool changer capacity, the first you can load by hand is tool nr 25.
  13. K

    Anyone In Germany Willing To Help Purchase A Deckel Dividing Head?

    I have one laying around for years, never used by me and most likely also not by the previous owner. I think I even still have the box it was orginal shipped in. If you are interested I have to dig it up to make pictures, I just have never shipped anything outside Europe.
  14. K

    Schaublin 125-CNC retrofit:

    No, too long ago, no one remembers. Have you seen this one: Bienvenue chez H. Stoller spécialiste retrofitte, revision et automatisation
  15. K

    Schaublin 125-CNC retrofit:

    I know a workshop that bought such a machine new, they found out the controller was full of troubles . Like doing moves or toolchanges that were not programmed. That is why most of these machines have seen little use.
  16. K

    1997 dmu50v another day another problem

    DMG here in Europe will not diagnose the error, they will just replace the drive, interface-card and motor and see what happens.Because it is their experience most likely the error will be gone this way but there is no garantee. But you will pay the bill for the parts. If you choose EIC I...
  17. K

    DMU-50eVo "E03 Swimming Switch Lubrication Low"

    Sorry, I forgot the Evo models use grease for lubrications. So yes that is the one. (The one with the solenoids is the hydraulic unit needed for the toolchange) I use Klüber Microlube GB00.If the pump has already taken air then this error might pop up for quit a while until the air is pumped...
  18. K

    DMU-50eVo "E03 Swimming Switch Lubrication Low"

    You need to fill the central lubricatoin unit with oil.
Top